Design of Directional Coupler Structure in Electro-Optic Integrated Circuit Using Refractive Index Sensor Based on Silicon Nitride Substrate

الموضوعات : Journal of Optoelectronical Nanostructures

Sina Tahanazadeh ¹ , Sharifeh Shahi ² , Atefeh Salimi Shahraki ³

1 - Department of Electrical engineering, Isf.C., Islamic Azad University, Isfahan, Iran
2 - Department of Biomedical Engineering and Laser and Biophotonics in Biotechnologies Research Center, Isf.C., Islamic Azad University, Isfahan, Iran
3 - Department of Electrical engineering, Isf.C., Islamic Azad University, Isfahan, Iran

تاريخ الإرسال : 02 السبت , شعبان, 1446 تاريخ التأكيد : 26 الأربعاء , صفر, 1447 تاريخ الإصدار : 09 الأحد , جمادى الثانية, 1447

الکلمات المفتاحية: Directional Coupler Waveguide, Fundamental Mode , Photonic Integrated Circuit (PIC), Refractive Index, Sensor,

ملخص المقالة :

Ansys Lumerical software, with its powerful MODE and FDTD modules, emerges as an indispensable tool for analyzing light behavior within electro-optical integrated circuits that play a vital role in fulfilling this critical needwithin intricate structures and evaluating their feasibility for many applications. The MODE module, equipped with the FDE and varFDTD solvers, excels in efficiently simulating light propagation, providing rapid results that are invaluable for initial comparisons and design exploration in based on increasing the efficiency. In this study, a simulated sensor was strategically integrated into a directional coupler structure. By meticulously analyzing light propagation through strategically placed monitors within this integrated system, were able to gain valuable insights into the sensor's performance. The findings demonstrated that the varFDTD solver within the MODE module proved highly effective in optimizing the design of the directional coupler based the TM mode behavior into the TE mode. As the light polarization changes, variations occurred at a width range between 0.66 to 0.83 micrometers.

This optimization resulted in a significant enhancement of the sensor's efficiency, ensuring its robust and reliable operation across a wide range of environmental conditions and operational scenarios.

المصادر:

[1]. Rabaey, J.M., A. Chandrakasan, and B. Nikolic, Digital integrated circuits. Vol. 2. 2002: Prentice hall Englewood Cliffs.

[2]. Yariv, A., Optical electronics in modern communications. (No Title), 1997.

[3]. Dong, P., et al., Silicon photonic devices and integrated circuits. Nanophotonics, 2014. 3(4-5): p. 215-228.

[4]. Ye, W.N. and Y. Xiong, Review of silicon photonics: history and recent advances. Journal of Modern Optics, 2013. 60(16): p. 1299-1320.

[5]. Martinez, A., F. Cuesta, and J. Marti, Ultrashort 2-D photonic crystal directional couplers. IEEE Photonics Technology Letters, 2003. 15(5): p. 694-696.

[6]. Zhang, M., et al., A lithium-niobate waveguide directional coupler for switchable mode multiplexing. IEEE Photonics Technology Letters, 2018. 30(20): p. 1764-1767.

[7]. Shang, K., et al., Silicon nitride tri-layer vertical Y-junction and 3D couplers with arbitrary splitting ratio for photonic integrated circuits. Optics Express, 2017. 25(9): p. 10474-10483.

[8]. Zafar, H., et al., O-band TE-and TM-mode densely packed adiabatically bent waveguide arrays on the silicon-on-insulator platform. Optics Express, 2023. 31(13): p. 21389-21398.

[9]. El Dirani, H., Development of high quality silicon nitride chips for integrated nonlinear photonics. 2019, Université de Lyon.
[10]. Venediktov, I., et al., Study of Directional Couplers for Optical Qubit Quantum Operations. Technical Physics, 2024. 69(5): p. 1450-1455.