Using Taguchi Experimental Design Method for Obtaining Suitable Thickness in Decora-tive Chromium Electroplating
الموضوعات : Physical Chemistry & ElectrochemistryAiyoub Parchehbaf Jadid 1 , Mostafa Pourjafar 2
1 - Department of Chemistry, Ardabil Branch, Islamic Azad University, Ardabil, Iran
2 - Department of Chemistry, Payame Noor University, Tehran, Iran
الکلمات المفتاحية: Taguchi Method, Electroplating, Thickness, Decorative Chromium, Experimental Design,
ملخص المقالة :
In this study, Taguchi experimental design has been used for the optimization of thickness of chromium layers. For this purpose brass materials have been electroplated under various conditions of the process. An orthogonal array (OA) was employed to analyze the effect of plating parameters on the characteristic of the thickness. Variables which were considered for working were as following; amount of chromic acid, amount of sulfuric acid, time, and current density. Eventually, the obtained results revealed that among the influential parameters in the process, only current density of 6A/dm2 and time of 4 minutes have the most effect on the enhancement of the thickness.
[1] D. Wang, R. Shi, T. Kou. Composite plating of hard chromium on aluminum substrates, Surf. Coat. Technol., 184 (2004) 15–21.
[2] M. Bayramoglua, , B. Onatb, N. Gerena, Statistical optimization of process parameters to obtain maximum thickness and brightness in chromium plating, J. Mater. Process. Technol., 203 (2008) 277–286.
[3] G. A. Lausman, Surface engineering for enhanced performance against wear,Surf. Coat. Technol., 814 (1996) 86-87.
[4] C. A. Snavely, and C. L. Faust, Failure of electrodeposited chromium coatings on cast iron substrates, J. Electrochem. Soc. 97 (1950) 3.
[5] A. M. Abd El-Halim, M. I. Sobahi , A.O. Baghlaf, The role played by the anions in cadmium electroplating from some acidic baths, Surf. Technol. 18 (1983) 225-232.
[6] J. H. Chang, F.Y. Hsu, M. J. Liao, C.A. Huang, The electrochemical behavior of the bright chromium deposits plated with direct- and pulse-current in 1 M H2SO4, Corros. Sci., 48 (2006) 460-471 .
[7] F. Sanchez Lasheras, J. A. Vilan Vilan, P. J. Garcia Nieto, J. J. del Coz Diaz, The use of design of experiments to improve a neural network model in order to predict the thickness of the chromium layer in a hard chromium plating process, Math. Comput. Model., 52 (2010) 1169-1176.
[8] C. A. Huang, W. Lin, M. J. Liao, The characterization of electroplated Cr coating, Corros. Sci. 48 (2006) 460-471.
[9] T. Mori, The new experimental design ,Taguchi’s approach to quality engineering, ASI Press, First Ed., Printed in the United States of America, 1990.
[10] L. Basso, A. Winterbottom, H. E. Wynn, A review of the ‘Taguchi methods’ for off-line quality control, Qual. Relia. Eng., 2 (1986) 71-79.
[11] O. Kempthorne, The design and analysis of experiments. New York: John Wiley and Sons, 1952.
[12] W. G. Cochran, G. M. Cox. Experimental designs, 2nd ed., New York: John Wiley and Sons, 1957.
[13] S. L. Lin, M. R. Fuh, Orthogonal array optimization of ultrasound-assisted emulsification-microextraction for the determination of chlorinated phenoxyacetic acids in river water, J. Chromatogr, 21 (2010) 3467-3472.
[14] C. F. J. Wu, M. S. Hamada, Experiments: planning, analysis and parameter design optimization, John Wiley and Sons, New York, 2000.
[15] K. K. Chee, M. K. Wong, H. K. Lee, Determination of 4-nonylphenol—part 2: Orthogonal array design as a chemometric method for the solid-phase microextraction of 4-nonylphenol in water, J. Microcolumn Sep., 8 (1996) 131-136.
[16] S. D. Bolboaca, L. Jantschi, Design of experiments: Useful orthogonal arrays for number of experiments from 4 to 16, Ent., 9, 2007, 198-232.
[17] A. Yazdani, S. Pourjafar, A. Rahimpour, Optimization of asphalt binder modified with PP/SBS/Nanoclay nanocomposite using Taguchi method, Desalination, 315 (2013) 107-114.
[18] K. Hinkelmann, O. Kempthorne, Design and analysis of experiments: Introduction to experimental design, Wiley-Interscience, New York, 2007.
[19] G. Taguchi, Introduction to quality engineering, Asian Productivity Organization, Tokyo, 1990.
[20] P. J. Ross, Taguchi techniques for quality engineering, McGraw-Hill, New York, 1988 .
[21] B. F. Ryan, B. L. Joiner, J. D. Cryer, MINITAB Handbook, Duxbury Press, 2005.
[22] S. H. Park, Robust design and analysis for quality engineering, Chapman & Hall, 1996.
186 A. Parchehbaf Jadid & M. Pourjafar/ Journal of Physical Chemistry and Electrochemistry Vol.2 No.4 (2014) 179-186
