An Improved Analytical Model for Prediction of Residual Deformation in Longitudinal Scheme of Laser Tube Forming Process
الموضوعات :
Hossein Ebrahimi
1
,
Zohrhe Ebrahimi
2
1 - Department of Materials Science and Engineering, Sharif University of Technology, Azadi Ave., Tehran, Iran.
2 - Mechanical Engineering Department, Payame Noor University (PNU), P.O.Box 19395-4697 Tehran, Iran
الکلمات المفتاحية: Laser Tube Forming, Axial Scanning Scheme, Bending Angle, Residual Deformation, Analytical Model ,
ملخص المقالة :
Laser tube bending is a new procedure for bending tubes in industrial applications. Laser scanning can be performed using circumferential and longitudinal schemes. In this paper, an analytical model was developed to predict the effects of the longitudinal scanning scheme on the laser forming of tubes. Moreover, the effects of laser parameters and tube dimensions on residual deformation are investigated for the longitudinal scanning scheme. The presented analytical model can be utilized as a powerful tool to determine the residual bending angle, residual strain, and curvatures. To apply the proposed analytical model, a hollow tube made of mild steel is considered. The residual strain and curvature were evaluated after one pass of laser scanning for the longitudinal scheme. The results revealed that increasing the laser beam diameter leads to a reduction in the residual deformation of the tube. Furthermore, the residual tube deformation was enhanced by increasing the laser power or decreasing the laser scanning velocity.
[1] Cheng, J. and Yao, Y.L. 2001. Cooling effects in multiscan laser forming. Journal of Manufacturing Processes. 3:60-72. doi: 10.1016/s1526-6125(01)70034-5.
[2] Liu, C. and Yao, Y.L. 2005. FEM-based process design for laser forming of doubly curved shapes. Journal of Manufacturing Processes. 7:109-121. doi: 10.1016/s1526-6125(05)70088-8.
[3] Cheng, P., Yao, Y.L., Liu, C., Pratt, D. and Fan, Y. 2005. Analysis and prediction of size effect on laser forming of sheet metal. Journal of Manufacturing Processes. 7:28-41. doi:10.1016/s1526-6125(05)70079-7.
[4] Shen, H., Yao, Z., Shi, Y. and Hu, J. 2006. An analytical formula for estimating the bending angle by laser forming. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 220:243-247. doi: 10.1243/095440606x79721.
[5] Shi, Y., Shen, H., Yao, Z. and Hu, J. 2007. An analytical model based on the similarity in temperature distributions in laser forming. Optics and Lasers in Engineering. 45:83-87. doi: 10.1016/j.optlaseng.2006.04.006.
[6] Aher, V. and Navthar, R.R. 2024. A Comprehensive review on laser bending of advanced materials. Lasers in Manufacturing and Materials Processing. doi: 10.1007/s40516-024-00261-w.
[7] Imhan, K.I., Baharudin, B.T.H.T, Zakaria, A., Ismail, M.I.S.B., Alsabti, N.M.H. and Ahmad, A.K. 2018. Features of laser tube bending processing based on laser forming: A Review. Journal of Lasers, Optics and Photonics. 5:174. doi: 10.4172/2469-410X.1000174.
[8] Hashemi, S.J. 2021. Investigation of the effect of different forming pressure curves on formability of AA1050 tubes in warm hydroforming process. Journal of Modern Processes in Manufacturing and Production. 10(1):52-61. dor: 20.1001.1.27170314.2021.10.1.4.3.
[9] Feizi, M. and Jafari Nedoushan, R. 2015. Finite element modeling and experimental study of the spline tube forming. Journal of Modern Processes in Manufacturing and Production. 4(2):5-12. dor: 20.1001.1.27170314.2015.4.1.4.1.
[10] Li, W. and Yao, Y.L. 2001. Laser bending of tubes: mechanism, analysis, and prediction. Journal of Manufacturing Science and Engineering. 123:674-681. doi: 10.1115/1.1392992.
[11] Hao, N. and Li, L. 2003. An analytical model for laser tube bending. Applied Surface Science. 208–209:432–436. doi: 10.1016/S0169-4332(02)01428-9.
[12] Hao, N. and Li, L. 2003. Finite element analysis of laser tube bending process. Applied Surface Science, 208:437-441. doi: 10.1016/s0169-4332(02)01429-0.
[13] Hsieh, H.S. and Lin, J. 2005. Study of the buckling mechanism in laser tube forming. Optics & Laser Technology. 37:402-409. doi: 10.1016/j.optlastec.2004.06.004.
[14] Zhang, J., Cheng, P., Zhang, W., Graham, M., Jones, J., Jones, M. and Yao, Y.L. 2006. Effects of scanning schemes on laser tube bending. Journal of Manufacturing Science and Engineering. 128:20-33. doi: 10.1115/1.2113047.
[15] Safdar, S., Li, L., Sheikh, M.A. and Liu, Z. 2007. Finite element simulation of laser tube bending: effect of scanning schemes on bending angle, distortions and stress distribution. Optics & Laser Technology. 39:1101–1110. doi: 10.1016/j.optlastec.2006.09.014.
[16] Hao, N. and Gai, Y. 2011. Numerical Simulation on the laser bending of thin wall tubes. Key Engineering Materials. 460-461:798-801. doi: 10.4028/www.scientific.net/KEM.460-461.798.
[17] Zahrani, E.G. and Marasi, A. 2012. Modeling and optimization of laser bending parameters via response surface methodology. Proc IMechE Part C: Journal of Mechanical Engineering Science. doi: 10.1177/0954406212461119.
[18] Venkadeshwaran, K., Das, S. and Misra, D. 2012. Bend angle prediction and parameter optimisation for laser bending of stainless steel using FEM and RSM. International Journal of Mechatronics and Manufacturing Systems. 5(3/4):308–321. doi: 10.1504/ijmms.2012.048237.
[19] Guan, Y., Yuan, G., Sun, S. and Zhao, G. 2013. Process simulation and optimization of laser tube bending. Int J Adv Manuf Technol. 65:333–342. doi: 10.1007/s00170-012-4172-6.
[20] Jamil, M.S.C., Fauzi, E.R.I., Juinn, C.S. and Sheikh, M.A. 2015. Laser bending of pre-stressed thin-walled nickel micro-tubes. Optics & Laser Technology. 73:105–117. doi: 10.1016/j.optlastec.2015.04.012.
[21] Li, F., Liu, S., Shi, A., Chu, Q., Shi, Q. and Li, Y. 2019. Research on laser thread form bending of stainless steel tube. International Journal of Precision Engineering and Manufacturing. 20:893–903. doi: 10.1007/s12541-019-00068-2.
[22] Keshtiara, M., Golabi, S. and Tarkesh Esfahani, R. 2019. Multi objective optimization of stainless steel 304 tube laser forming process using GA. Engineering with Computers. 35:155-171. doi. 10.1007/s00366-019-00814-0.
[23] Safari, M. 2019. A Study on the laser tube bending process: effects of the irradiating length and the number of irradiating passes. Iranian Journal of Materials Forming. 7(1):46-53. doi: 10.22099/IJMF.2019.34213.1133.
[24] Folkersma, K.G.P., Romer, G.R.B.E., Brouwer, D.M. and Herder, J.L. 2015. High precision optical fiber alignment using tube laser bending. The International Journal of Advanced Manufacturing Technology. 86:953-961. doi: 10.1007/s00170-015-8143-6.
[25] Imhan, K.I, Hang Tuuah Baharudin, B.T., Zakaria, A. and Ahmad, A.K. 2017. Investigation of material specifications changes during laser tube bending and its influence on the modification and optimization of analytical modeling. Optics & Laser Technology. 95:151-156. doi: 10.1016/j.optlastec.2017.04.030.
[26] He, Y.; Li, H.; Zhang, Z. and Guangjun, L. 2012. Advances and trends on tube bending forming technologies. Chinese Journal of Aeronautics. 25:1–12. doi: 10.1016/S1000-9361(11)60356-7.
[27] Khandandel, S.E.; Seyedkashi, S.M.H. and Moradi, M. 2021. M. Numerical and experimental analysis of the effect of forced cooling on laser tube forming. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 43:338. doi: 10.1007/s40430-021-03063-9.
[28] Safari, M., Alves de Sousa, R. and Joudaki, J. 2023. Comprehensive assessment of laser tube bending process by response surface methodology. Steel Research International. 94:2200230. doi. 10.1002/srin.202200230.
[29] Dong, W., Zhang, Y., Bao, L. and Shin, K. 2024. Effects of laser scanning strategy on bending behavior and microstructure of DP980 steel. Materials. 17:2415. doi. 10.3390/ma17102415.
[30] Wang, X.Y.;Wang, J.; Xu,W.J. and Guo, D.M. 2014. Scanning path planning for laser bending of straight tube into curve tube. Optics & Laser Technology. 56:43–51. doi. 10.1016/j.optlastec.2013.07.001.
