Estimation of fatigue lifetime of a cervical disc prosthesis using finite element and experimental investigation of the amount of wear
الموضوعات : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیکSana Ghafarmoghadam 1 , Alireza Seifzadeh 2 , Ali Mokhtarian 3 , Reza Abedinzadeh 4
1 - PhD Student of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Isfahan, Iran
2 - Department of Biomedical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Isfahan, Iran
3 - Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Isfahan, Iran
4 - Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Isfahan, Iran
الکلمات المفتاحية: Fatigue, Lifetime, Wear, Cervical disc prosthesis, Finite element,
ملخص المقالة :
One of the main problems of cervical disc implants is the wear caused by the overlapping of the surfaces, leading to a reduction in the fatigue lifetime of the prosthesis, which in turn results in premature removal of the implant from the patient's body. To obtain the amount of wear and fatigue lifetime of the cervical disc implant, first, a three-dimensional model of a cervical disc implant (prodisc-C), consisting of a core made of ultra-high molecular weight polymer (UHMWPE) material with upper and lower plates made of cobalt-chromium and titanium, was designed in Solidworks software. Then it was transferred to Abaqus software to evaluate the von Mises stress distribution under the application of a concentrated force of 73.6 N. Afterward, the results of this simulation were inputted into the Fe-safe software and the fatigue lifetime of the implant was calculated. Furthermore, the wear rate of the polymer used in the central core was experimentally investigated. The calculation results of the maximum fatigue lifetime cycle of the prosthesis were acquired in three positions in the upper plane, middle plane, and lower plane. The wear volume (i.e., volumetric wear) obtained numerically during 10,000,000 cycles was equal to 17.5 mm3, and the wear mass acquired by the wear test during the probe movement on the sample in a 1000 m distance was equal to 0.005 gr.
[1] O’Brien, M. (1996). Anatomy and human movement: Structure and Function. Br. J. Sports Med., 30(3), 269–269, doi: 10.1136/bjsm.30.3.269.
[2] Kamanli, A., Karaca-Acet, G., Kaya, A., Koc, M. and Yildirim, H. (2010). Conventional physical therapy with lumbar traction; clinical evaluation and magnetic resonance imaging for lumbar disc herniation. Bratisl Lek Listy, 111(10), 541-544, PMID: 21125798.
[3] Kumar, N., Kukreti, S., Ishaque, D., Sengupta, K. and Mulholl, R.C. (2002). Functional anatomy of the deer spine: An appropriate biomechanical model for the human spine?. Anatomical Record, 266(2), 108–117, doi: 10.1002/ar.10041.
[4] Allegri, M., Montella, S., Salici, F., Valente, A., Marchesini, M., Compagnone, C., Baciarello, M., Manferdini, M.E. and Fanelli G. (2016). Mechanisms of low back pain: a guide for diagnosis and therapy. F1000Research, 5 p. 1530, doi: 10.12688/f1000research.8105.2.
[5] Mo, Z.J., Bin Zhao, Y., Wang, L.Z., Sun, Y. Zhang, M. and Fan, Y.B. (2014). Biomechanical effects of cervical arthroplasty with U-shaped disc implant on segmental range of motion and loading of surrounding soft tissue. Eur. Spine J., 23(3), 613–621, doi: 10.1007/s00586-013-3070-4.
[6] Marrey, R.V.R., Burgermeister, R. Grishaber, B. and Ritchie, R.O. (2006). Fatigue and life prediction for cobalt-chromium stents: A fracture mechanics analysis. Biomaterials, 27(9), 1988–2000, doi: 10.1016/j.biomaterials.2005.10.012.
[7] Darden, B.V. (2012). ProDisc-C cervical disk arthroplasty. Semin. Spine Surg., 24(1), 8–13, doi: 10.1053/j.semss.2011.11.003.
[8] Moussa, A., Hacene, A. and Hammoudi, M. (2018). Numerical Shape Optimization of Cervical Spine Disc Prosthesis. 36, 56–69, https://doi.org/10.4028/www.scientific.net/JBBBE.36.56.
[9] Goreham-Voss, C.M., Hyde, P.J., Hall, R., Fisher, J. and Brown, T.D. (2010). Cross-shear implementation in sliding-distance-coupled finite element analysis of wear in metal-on-polyethylene total joint arthroplasty: Intervertebral total disc replacement as an illustrative application. J. Biomech., 43(9), 1674–1681, doi: 10.1016/j.jbiomech.2010.03.003.
[10] Rawlinson, J.J., Punga, K.P., Gunsallus, K.L., Bartel, D.L. and Wright, T.M. (2007). Wear simulation of the ProDisc-L disc replacement using adaptive finite element analysis. J. Neurosurg. Spine, 7(2), 165–173, doi: 10.3171/SPI-07/08/166.
[11] Bhattacharya, S., Goel, V., Liu, K., Kiapour, X.A. and Serhan, H.A. (2011). Models that incorporate spinal structures predict better wear performance of cervical artificial discs. Spine J., 11(8), 766–776, doi: 10.1016/j.spinee.2011.06.008.
[12] Bhattacharya, S. and Goel, S.V.K. ( 2013). Wear outcomes of a metal on metal disc arthroplasty – A computational model. 3, 13–21, doi: 10.5923/s.mechanics.201308.03.
[13] Wu, W., Lyu, J., Liu, H., Rong, X., Wang, B., Hong, Y., Gong, Q., Li, T., Liu, L., Song, Y., Cai, Y. and Xu, W. (2015). Wear assessments of a new cervical spinal disk prosthesis: Influence of loading and kinematic patterns during in vitro wear simulation. Proc. Inst. Mech. Eng. Part H J. Eng. Med., 229(9), 619–625, doi: 10.1177/0954411915594829.
[14] Green, T.P., Adams, M.A. and Dolan, P. ( 1993). Tensile properties of the annulus fibrosus - II. Ultimate tensile strength and fatigue life. Eur. Spine J., 2(4), 209–214, doi: 10.1007/BF00299448.
[15] Yu, C.Y., Tsai, K.H., Hu, W.P., Lin, R.M., Song, H.W. and Chang, G.L. ( 2003). Geometric and morphological changes of the intervertebral disc under fatigue testing. Clin. Biomech., 18(6), doi: 10.1016/S0268-0033(03)00078-0.
[16] Galbusera, F., Van Rijsbergen, M., Ito, K., Huyghe, J.M., Brayda-Bruno, M. and Wilke, H.J. (2014). Ageing and degenerative changes of the intervertebral disc and their impact on spinal flexibility. Eur. Spine J., 23(3), doi: 10.1007/s00586-014-3203-4.
[17] Subramani, A.V., Whitley, P.E., Garimella, H.T. and Kraft, R.H. (2020). Fatigue damage prediction in the annulus of cervical spine intervertebral discs using finite element analysis. Comput. Methods Biomech. Biomed. Engin., 23(11), 773–784, doi: 10.1080/10255842.2020.1764545.
[18] Qasim, M., Natarajan, R.N, An, H.S. and Andersson, G.B. (2012). Initiation and progression of mechanical damage in the intervertebral disc under cyclic loading using continuum damage mechanics methodology: A finite element study. J. Biomech. 45(11), 1934–1940, doi: 10.1016/j.jbiomech.2012.05.022.
[19] Qasim, M.R., Natarajan, N.H., An, S. and Andersson, G.B. (2013). Damage accumulation location under cyclic loading in the lumbar disc shifts from inner annulus lamellae to peripheral annulus with increasing disc degeneration. J. Biomech., 47(1), 24–31, doi: 10.1016/j.jbiomech..10.032.
[20] Faghihi, A., Makwana, R.A., Krishna, R. and Kraft, R.H. (2014). Towards a Micromechanical Model of Intervertebral Disc.
[21] Faghihi, D., Sarkar, S., Naderi, M., Rankin, J., Hackel, E.L. and Iyyer, N. (2018). A probabilistic design method for fatigue life of metallic component. ASCE-ASME J. Risk Uncertain. Eng. Syst. Part B Mech. Eng., 4(3), 1–27, doi: 10.1115/1.4038372.
[22] Bhattacharya, S., Ph, D. Greenwald, A.S. and Oxon, D.P. (2013). Cervical artificial disc wear.
[23] Desai, C., Hirani, H. and Chawla, A. (2015). Life estimation of hip joint prosthesis. J. Inst. Eng. Ser. C, 96(30, 261–267, doi: 10.1007/s40032-014-0159-4.
[24] Hegadekatte, V., Huber, N. and Kraft, O. (2006). Modeling and simulation of wear in a pin on disc tribometer. Tribol. Lett., 24(1), 51–60, doi: 10.1007/s11249-006-9144-2.
[25] Hegadekatte, V., Kurzenhäuser, S., Huber, N. and Kraft, O. ( 2008). A predictive modeling scheme for wear in tribometers. Tribol. Int., 41(11), 1020–1031, doi: 10.1016/j.triboint.
[26] Store, H.I.S.O. ( 2011). International standard intervertebral spinal disc prostheses.
[27] I. Standard .(2008). International standard.
[28] ASTM F2423−11. (2016). Standard guide for functional, kinematic, and wear assessment of total disc prostheses 1. ASTM Int., vol. 11. December, doi: 10.1520/F2423-11R16.
