Experimental Investigation of Nano-structured Aluminum Production Using Accumulative channel-die compression bonding (ACCB)
الموضوعات : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیک
محسن مطهری نژاد
1
(دانشگاه آزاد اسلامی، واحد تهران جنوب، باشگاه پژوهشگران جوان و نخبگان، تهران، ایران.)
سعید شهرکی
2
(عضو هیئت علمی گروه مکانیک، دانشکده فنی و مهندسی، دانشگاه زابل.)
الکلمات المفتاحية: Strength, Nanostructure, strain, Channel mold, Aluminum 1100,
ملخص المقالة :
In this paper, the Accumulative Channel-die Compression Bounding (ACCB) method is investigated as a new method of severe plastic deformation to produce Nano-crystalline bulk metals on the basis of pressing in a channel mold. Aluminum as One of the most usable metal in industry is processed using this method. Analyzing the processed samples show that after four passes of ACCB method, the ultimate strength of samples reaches to 120 from 60 Mpa. The grain sizes of samples reaches to 627 nm from 8-6µm in annealed phase after four passes of ACCB method. Also, the vicker's hardness of samples reaches to 51.8 from 20 HV after four passes. These changes consist of the increasing the hardness and strength of aluminum sample and achieving to the high ratio of strength to weight of sample can help us to better use this materials to fabricate less weight structures for using in automotive and airplane industry.
[1] Shin D.H., Park J.J., Kim Y.S., Park K.T., Constrained groove pressing and its application to grain refinement of aluminum, Materials Science and Engineering A, Vol. 98, 2001, pp. 98-103.
[2] Gleiter H., Hansen N., Horsewell A., Leffers T., Lilholt H., Deformation of polycrystals: Mechanisms and microstructures. Roskilde, Denmark: Risø National Laboratory, 2000, pp. 15.
[3] Erb U., El-Sherik A.M., Palumbo G., Aust K.T., Synthesis, structure and properties of electroplated nanocrystalline materials, Nanostruct Mater, Vol. 2, 1993, pp. 383-390.
[4] Koch C.C., Cho Y.S., Nanocrystals by high energy ball milling, Nanostruct Mater, Vol. 1, 1992, pp. 207-212.
[5] Zhu Y.T., Lowe T.C., Langdon T.G., Performance and applications of nanostructured materials produced by severe plastic deformation, Scripta Materialia, Vol. 8, 2004, pp. 825-830.
[6] Valiev R.Z., Estrin Y., Horita Z., Langdon T.G., Zehetbauer M.J., Zhu Y.T., Producing bulk ultrafine-grained materials by severe plastic deformation, Overview Nanostructured Materials, Vol. 58, 2006, pp. 33–39.
[7] Valiev R.Z., Langdon T.G., Progress in Materials Science, Vol. 51, 2006, pp. 881-981.
[8] Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG. Scripta Mater, 1998, pp. 39-1221.
[9] Smirnova N. A, Levit V. I., Pilyugin V. I., Kuznetsov R. I., Davydova L. S., Sazonova V. A., Fiz Metal Metalloved, Vol. 61, 1986, pp. 1170–1177.
[10] Shin D.H., Park J.J., Kim Y.S., Park K.T., Constrained groove pressing and its application to grain refinement of aluminum, Materials Science and Engineering: A, Vol. 98, 2001, pp. 98-103.
[11] Shaarbaf M., Toroghinejad M.R., Nano-grained copper strip produced by accumulative roll bonding process, Materials Science and Engineering A, Vol. 473, 2008, pp. 28–33
[12] Yoon S.C., Krishnaiah A., Chakkingal U., Kim H.S., Severe plastic deformation and strain localization in groove pressing, Computational Materials Science, Vol. 43, 2008, pp. 641-645.
[13] Shirdel A., Khajeh A., Moshksar M.M., Experimental and finite element investigation of semi-constrained groove resisting process, Materials & Design, 2010, pp. 946-950.
[14] Estrin Y. and Necking H., A unified phenomenological description of work hardening and creep based on one-parameter models, Acta Mater, 1998, pp. 57-70.
