Sorption Of Cerium By The Pani / Cnt Composition From Sulfuric Chloride Solution

الموضوعات :

L.K. Ybraimzhanova ¹ (M.Kh.Dulaty Taraz State University, Republic of Kazakhstan, Taraz city)
N.A. Bektenov ² (JSC A.Bekturov Institute of Chemical Sciences, Republic of Kazakhstan, Almaty)
I.D. Troshkina ³ (Dmitry Mendeleev University of Chemical Technology of Russia, Miusskaya sq. 9, 125047 Moscow, Russia)
I.V. Burakova ⁴ (Tambov State Technical University, 106 Sovetskaya Street, Tambov 392000, Russia)

تاريخ الإرسال : 23 السبت , ذو القعدة, 1442 تاريخ التأكيد : 28 الثلاثاء , صفر, 1443 تاريخ الإصدار : 07 الخميس , جمادى الأولى, 1444

الکلمات المفتاحية: Activated Carbon, Adsorption, Isotherm, Kinetic models, Henry constant,

ملخص المقالة :

The purpose of the work is to study the sorption characteristics of a composite material based on carbon nanotubes and polyaniline (PANI/CNT) during the extraction of cerium from sulfuric chloride solutions. The sorption characteristics of a composite material based on carbon nanotubes and polyaniline (PANI/CNT) during the extraction of cerium from sulfuric chloride acid solutions are investigated. Nanocomposite polyaniline (60 wt.%)/CNT was prepared by oxidative polymerization of aniline on the CNT surface. Morphological and structural characteristics of the material were obtained using scanning electron microscopy.Using the PANI/CNT nanocomposite, a isotherm of cerium adsorption was obtained from aqueous solutions of the above composition, which has a linear character and can be described by the Henry equation.The kinetic constants obtained by processing the data on pseudo-first and pseudo-second order models and the Elovich model indicate that the kinetics of cerium adsorption on the PANI / CNT nanocomposite with a higher value of the correlation coefficient is described using a pseudo-second order model. Moreover, it was found that the equilibrium sorption time was 30 min, and the adsorption capacity of the sorbent was 15 mg g-1. Data processing using kinetic models showed that absorption occurs due to the chemical interaction of cerium and the functional groups of the nanocomposite. As a consequence, it can be assumed that the chemical interaction with surface functional groups-carboxylic, phenolic, etc. – contributes to the adsorption mechanism of cerium by the PANI-CNT nanocomposite.

المصادر:

1. Lucas J., Lucas P., Le Mercier T., Rollat A., Davenport W.G., 2018. Rare earths: science, technology, production and use. Elsevier; 2014 Sep 9.


2. Dezhi Q.I., 2018. Hydrometallurgy of rare earths. Extraction and Separation. Elsevier. pp. 804.


3. Fujinaga K., Yoshimori M., Nakajima Y., Oshima S., Watanabe Y., Stevens G.W., Komatsu Y., 2013. Separation of Sc (III) from ZrO (II) by solvent extraction using oxidized Phoslex DT-8. 133, 33-36.


4. Gupta C.K., Krishnamurthy N., 2016. Extractive metallurgy of rare earths. Taylor & Francis Group, LLC CRC. pp. 869.


5. Kuang S.T., Liao W.P., 2018. Progress in the extraction and separation of rare earths and related metals with novel extractants: A review Sci China Tech Sci. 61, 1319–1328.


6. Korovin V., Pogorelov Y.U., 2011. Comparison of Scandium Recovery Mechanisms by Phosphorus-Containing Sorbents, Solvent Extractants and Extractants Supported on Porous Carrier. Scandium: Compounds, Productions and Applications. Nova Science Publishers Inc., New-York. pp. 77-100.


7. Youcai L.U, Zhang Z., Yanling L.I, Wuping L.I., Extraction and recovery of cerium(IV) and thorium(IV) from sulphate medium by an α-aminophosphonate extractant. J Rare Earth. 35(1), 34–40.


8. WU D., Xiong Y., Li D., 2006. Studies on the roles of different components in Cyanex 302 for rare earth ions extraction and separation. Sep. Sci. Technol. 41(8), 1725–1739.


9. Wei H., Li Y., Zhang Z., Xue T., Kuang S., Liao W., 2017. Selective extraction and separation of Ce(IV) and Th(IV) from RE(III) in sulphate medium using Di(2-ethyl-hexyl)-N-heptylaminomethylphosphonate extractant. Solvent Extraction and Ion Exchange. 35(2), 117–129.


10. Komissarova L.N., 2001. Neorganicheskaja i analiticheskaja himija skandija [Inorganic and analytical chemistry of scandium], Moscow: Jeditorial URSS. pp.512.


11. Hérès X., Blet V., Di Natale P., Ouaattou A., Mazouz H., Dhiba D., Cuer F., 2018. Selective extraction of rare earth elements from phosphoric acid by ion exchange resins. Metals. 8(9), 682.


12. Kolodynska D., Hubicki Z., 2012. Investigation of sorption and separation of lanthanides on the ion exchangers of various types. Ion exchange technology. Chapter 6. : IntechOpen. pp. 101–154.


13. Turanov A.N., Karandashev V.K., Sukhinina N.S., Masalov V.M., Emelchenko G.A., 2016. Adsorption of lanthanides and scandium ions by silica sol-gel material doped with novel bifunctional ionic liquid, trioctylmethylammonium 1-phenyl-3-methyl-4-benzoyl-5-onate. Journal of Environmental Chemical Engineering. 4(4), 3788–3796.


14. Oo N.S., Troshkina I.D., Min A., Shilyaev A.V., 2014.  Sorption of Rhenium and Vanadium from Mineralized Solutions by Fibrous Ionites. Russ J of Non-Ferrous Metals. 55(3), 242-246.


15. Lee G.S., Uchikoshi M., Mimura K., Isshiki M., 2010. Separation of major impurities Ce, Pr, Nd, Sm, Al, Ca, Fe, and Zn from La using bis (2-ethylhexyl)phosphoric acid (D2EHPA)-impregnated resin in a hydrochloric acid medium. Separ. and Purificat. Technol. 71(2), 186–191.


16. Matsunaga H., Ismail A.A., Wakui Y., Yokoyama T. Extraction of rare earth elements with 2-ethylhexyl hydrogen 2-ethylhexyl phosphonate impregnated resins having different morphology and reagent content. Reactive and Functional Polymers. 49(3), 2001, 189-195.


17. Matsunaga H., Ismail A.A., Wakui Y., Yokoyama T., 2008. Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule. Chem Eng J. 139(1), 93–105.


18. Nishihama S., Kohata K., Yoshizuka K., 2013. Separation of lanthanum and cerium using a coated solvent-impregnated resin. Separ and Purific Technol. 118, 511–518.


19. Ghorbani M., Eisazadeh H., Ghoreyshi A.A., 2012. Removal of Zinc Ions from Aqueous Solution Using Polyaniline Nanocomposite Coated on Rice Husk. Iranica Journal of Energy & Environment. 3(1), 66-71.


20. Kanwal F., Rehman R., Mahmud T., Anwar J., Ilyas R., 2012. Isothermal and thermodynamical modeling of chromium (III) adsorption by composites of polyaniline with rice husk and saw dust. Journal of the Chilean Chemical Society. 57(1), 1058-1063.


21. Ansari R., Mosayebzadeh Z., Keivani M.B., Khah A.M., 2011. Adsorption of Cationic Dyes from Aqueous Solutions using Polyaniline Conducting Polymer as a Novel Adsorbent. Journal of Advances in Scientific Research. 2(2), 27-34.


22. Salvatierra R.V., Oliveira M.M., Zarbin A.J., 2010. One-pot synthesis and processing of transparent, conducting, and freestanding carbon nanotubes/polyaniline composite films. Chemistry of Materials. 22(18), 5222–5234.


23. Šeděnková I., Trchova M., Stejskal J., 2008. Thermal degradation of polyaniline films prepared in solutions of strong and weak acids and in water – FTIR and Raman spectroscopic studies. Polymer Degradation and Stability. 93(12), 2147–2157.


24. Aung W.M., Marchenko M.V., Troshkina I.D., Burakova I.V., Gutnik I.V., Burakov A.E., Tkachev A.G., 2019. Scandium Adsorption from Sulfuric-Chloride Solutions by PANI/CNTs Nanocomposite. Advanced Materials & Technologies. 4(16), 58-65.