A two-dimensional numerical model of a planar solid oxide fuel cell
الموضوعات : Journal of the Iranian Chemical ResearchNorouz Mohammad Nouri 1 , Amin Mirahmadi 2 , Majid Kamvar 3
1 - Department of Mechanical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
2 - Department of Mechanical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
3 - Department of Mechanical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
الکلمات المفتاحية: Modeling, Solid oxide fuel cell, Reaction zone layers, COMSOL Multiphysics,
ملخص المقالة :
A two-dimensional CFD model of a planar solid oxide fuel cell (SOFC) has been developed.This model can predict the performance of SOFC at various operating and design conditions.The effect of Knudsen diffusion is accounted in the porous electrode (backing) and reaction zonelayers. The mathematical model solves conservation of electrons and ions and conservation ofspecies. The model is formulated in COMSOL Multiphysics 3.4, a commercial Finite ElementMethod (FEM) based on software package. The objective of the present study is to compare theresults obtained from FEM with Control Volume Method (CVM) results obtained by Hussain etal. Both sets of results are compared with the experimental data published in literature. Theresults obtained by FEM show more accurate agreement with the experimental data. Finaly, theeffect of various operating and design parameters on the performance of SOFC has beenexamined.
[1] S.C. Singhal, K. Kendall, High Temperature Solid Oxide Fuel Cells Fundamentals Design and
Applications, Kidlington Oxford, Elsevier, 2003.
[2] J. Yuan, B. Sunden, Trans. ASME J. Heat Transfer 127 (2005) 1380-1390.
[3] J. Larminie, A. Dicks, Fuel Cell Systems Explained. 2th ed, John Wiley and Sons Ltd, West Sussex,
England, 2003.
[4] M.M. Hussain, Multi-Component and Multi-Dimensional Mathematical Modeling of Solid Oxide
Fuel Cells. PhD Thesis, University of Waterloo, 2008.
[5] M.M. Hussain, X. Li, I. Dincer, J. Power Sources 161 (2006) 1012-1022.
[6] R. Taylor, R. Krishna, Multi Component Mass Transfer, John Wiley, 1993.
[7] R. Perry, D. Green, Perry’s Chemical Engineering Handbook, 7th ed., McGraw-Hill, 1997.
[8] N. Akhtar, S.P. Decent, D. Loghin, K. Kendall, Inter. J. Hydrogen Energy (2009) 1-19.
[9] D.H. Jeon, Electrochim. Acta 54 (2009) 2727-2736.
[10] P. Costamagna, P. Costa, V. Antonucci, Electrochim. Acta 43 (1998) 375-394.
[11] W.A. Rogers, R.S. Gemmen, C. Johnson, M. Prinkey, M. Shahnam, Fuel Cell Sci. Eng. Technol.
ASME (2003) 517–52.
[12] K. Tseronis, I. Kookos, K. theodoropoulos, Modeling and design of the solid oxide fuel cell anode,
COMSOL Users conference, Birmingham (2006).
[13] K. Nikooyeh, A.A. Jeje, J. M. Hill, J. Power Sources 171 (2007) 601-609.
[14] Y. Mollayi Barzi, M. Ghassemi, M.H. Hamedi, J. Power Sources 192 (2009) 200-209.
[15] S. Liu, W. Kong, Z. Lin, J. Power Sources 194 (2009) 854-863.
[16] C.W. Tanner, K.Z. Fung, A.V. Virkar, J. Electrochem. Soc. 144 (1997) 21–30.
[17] W. Lehnert, J. Meusinger, F. Thom, J. Power Sources 87 (2000) 57–63.
[18] J. Fleig, Annu. Rev. Mater. Res. 33 (2003) 361–382.
[19] A. Bieberle, L.P. Meier, L.J. Gauckler, J. Electrochem.l Soc. 148 (2001) A646-A656.
N.M. Nouri & et al. / J. Iran. Chem. Res. 3 (2010) 257-269
269
[20] R. Radhakrishnan, A.V. Virkar, S.C. Singhal, J. Electrochem. Soc. 152 (2005) A927-A936.
[21] K.J. Daun, S.B. Beale, F. Liu, G.J. Smallwood, J. Power Sources 157 (2006) 302-310.
[22] COMSOL User Guide, COMSOL Inc., Burlington, MA, (2005).
