Torsion of cylindrically poroelasic circular shaft with radial inhomogeneity .some exact solutions for extruder
الموضوعات :
محمد فرید خان سمنی
1
(Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University, Tehran,
Iran)
فرانک خان سمنی
2
(Department of Engineering, Zanjan University, Zanjan, Iran)
الکلمات المفتاحية: Torsion, FGM and poroelastic shaft, Radial inhomogeneity, extruder,
ملخص المقالة :
Torsion of elastic and poroelastic circular shaft of radially inhomogeneous, cylindrically orthotropic materials is studied with emphasis on the end effects example for extruder. To examine the conjecture of Saint-Venant’s torsion, we consider torsion of circular shaft with one end fixed and the other end free on which tractions that results in a pure torque are prescribed arbitrarily over the free end surface. Exact solutions that satisfy the prescribed boundary conditions point by point over the entire boundary surfaces are derived in a unified manner for cylindrically orthotropic shafts with or without radial inhomogeneity and for their coun- terparts of Saint-Venant’s torsion. Stress diffusion due to the end effect is examined in the light of the exact solutions.The present study enables us to assess Saint-Venant’s principle as applied to anisotropic, non-homogeneous poroelastic bodies in general and to evaluate the stress diffusion in torsion of radially inhomogeneous, cylindrically orthotropic cylinders in particular. The following conclusions can be drawn from the analysis
[1] S.-P. Timoshenko.,J.-N. Goodier , Theory of elasticity, third ed.McGraw-Hill, New York.1970.
[2] S.-P.Timoshenko., History of strength of materials, McGraw-Hill, New York.1953.
[3]F.-M.Baron, Torsion of Multi-Connected Thin-Walled Cylinders, J. Appl.1942. Mech, Vol. 9, pp. 72-74.
[4] Li.-Z.Ko, J. M. and Y.- Q. Ni, 2000,TorsionalRigidity of Reinforced Concrete Bars with Arbitrary Sectional Shape, Finite Elem. Anal .Des., Vol. 35, pp. 349-361.
[5]G.Mejak, 2000 ,Optimization of cross-section of hollow prismatic bars in torsion, Communications in Numerical Methods in Engineering, Vol. 16, pp. 687-695.
[6] K. Sezawa, K. Kubo, 1931,The buckling of a cylindrical shell under torsion, Aero Research Inst, Tokyo Imperial University, Report No. 176.
[7]E.Lundquist, 1932, Strength tests on thin-walled duralumin cylinders in torsion. NACA No. 427.
[8] A.Doostfatemeh, M.-R.Hematiyan, and S.Arghavan, 2009,Closed-form approximate formulations for torsional analyses of hollow tube with straight and circular edges, Journal of Mechanics, Vol. 25, pp. 401-409.
[9]R. Courant, 1943,Variational methods for the solution of problems of equilibrium and vibration, Bull Am Math Soc; 49(1):1–23.
[10]S.-P. Timoshenko, 1956,Strength of materials.thirded, Berkshire (England): Van Nostrand.
[11] P.-M. Quinlan, 1964,Thetorsion of an irregular polygon,Proc Royal SocLondSer A Math PhysSci; 282(1389):208–27.
[12]N.-I. Muskhelishvilli, 1953 .Some basic problems of the mathematical theory of elasticity. Groningen (Holland): P. Noordhoff.
[13]J.-R. Booker, S. Kitipornchai, 1971,Torsion of multilayered rectangular section, J EngMechDiv ASCE; 97(EM5):1451–68.
[14]Y.-M. Kuo, H.-D.Conway, 1973,The torsion of composite tubes and cylinders, I JSS; 9(12):1553–65.
[15]Y.-M. Kuo, H.-D.Conway, 1974,Torsion of cylinders with multiple reinforcement ,JEngMechDiv ASCE; 100(EM2):221–34.
[16] Y.-M. Kuo, H.-D.Conway, 1974,Torsion of composite rhombus cylinder, J ApplMech; 31(2):302–3.
[17] Y.-M. Kuo, H.-D.Conway, 1980, Torsion of reinforced square cylinder, J EngMechDiv ASCE; 106(EM6):1341–7.
[18]B.-A.Packham, R.-St. Shail, 1978 ,Venant torsion of composite cylinders, J Elasticity; 8(4):393–407.
[19] R. Ripton, 1998 ,Optimal fiber configurations for maximum torsional rigidity, Arch Ration Mech Anal; 144(1):79–106.
[20]T.Chen, Y. Benveniste, 2002, Chuang PC, Exact solutions in torsion of composite bars: thickly coated neutral inhomogeneities and composite cylinder assemblages, Proc Math PhysEngSci; 458(2023):1719–59.
[21] J.-F. Ely,O.-C.Zienkiewicz, 1960 ,Torsion of compound bars – a relaxation solution,Int J MechSci; 1(4):356–65.
[22]L.-R. Herrmann, 1965,Elastic torsional analysis of irregular shapes, J EngMechDiv ASCE (EM6):11–9.
[23] M.-A. Jaswon, A.-R., Ponter, 1963,An integral equation solution of the torsion problem,Proc Roy SocLondSer A Math PhysSci; 273(1353):237–46.
[24]J.-T.Kasikadelis, E.-J.Sapountzakis, 1986,Torsion of composite bars by boundary element method, J EngMech; 111(9):1197–210.
[25]E.-J.Sapountzakis, 2000,Solution of non-uniform torsion of bars by an integral equation method,ComputStruct; 77(6):659–67.
[26] E.-J. Sapountzakis, 2001, Nonuniform torsion of multi-material composite bars by the boundary element method, ComputStruct; 79(32):2805–16.
[27] M. Koizumi, 1993,The concept of FGM. Ceram Trans Function Grad Mater; 34(1):3–10.
[28]R., Plunkett, 1965,Torsion of inhomogeneous elastic prismatic bars, J EngInd; 87:391–2.
[29] F.-J. Rooney, M. Ferrari, 1995, Torsion and flexure of inhomogeneous elements, Compos Eng; 5(7):901–11.
[30] F.-J. Rooney, M. Ferrari, 1999, On the St. Venant problems for inhomogeneous circular bars, JApplMech; 66(2):32–44.
[31]C.-O.Horgan, A.-M.Chan, 1999,Torsion of functionally graded isotropic linearly elastic bars, J Elasticity; 52(2):181–99.
[32] J.-G. Tarn, H.-H.Chang, 2008, Torsion of cylindrically orthotropic elastic circular bars with radial inhomogeneity: some exact solutions and end effects,Int J Solids Struct; 45(1):303–19.
[33] F.-J. Rooney, M. Ferrari, 1995, Torsion and flexure of inhomogeneous elements, CompositesEngineering 5, 901–911.
[34]M.-A. Biot, 1962, Generalized theory of acoustic propagation in porous dissipative media, Journal of the Acoustical Society of America 34, 1254-1264.
[35] M.-A. Biot, 1972, Theory of finite deformation of porous solid. Indiana University Mathematics Journal 21, 597-620.
[36]M.-A.Biot, 1982, Generalized Lagrangian equations of non-linear reaction-diffusion, Chemical Physics 66, 11-26.
[37] S. Arghavan, M.-R.Hematiyan, 2009,Torsion of functionally graded hollow tubes, European Journal Mechanics A/Solids 28 (3), 551–559.
[38] R.-C. Batra, 2006,Torsion of a functionally graded cylinder, AIAA Journal 44 (6), 1363–1365.
[39] C.-O.Horgan, 2007,On the torsion of functionally graded anisotropic linearly elastic bars, IMA Journal of Applied Mathematics 72 (5), 556–562.
[40] F.-J. Rooney, M. Ferrari, 1995,Torsion and flexure of inhomogeneous elements , Composites Engineering 5 (7), 901–911.
[41] M. Udea, T. Nishimura, T. Sakate, 12–14 June 2002,Torsional analysis of functionally graded materials. In: Lao, Y.-C. Chowdhury, S.-H.Fragomeni, S. (Eds.), Advances in Mechanics of Structures and Materials: Proceedings of 17th
Australian Conference (ACMS17) .Tayor and Francis ,Queensland, Australia, pp. 533–538.
[42]T.Yaususi, A. Shigeyasu, 2000, Torsional characteristics of hemp palm branch with triangular cross-section (2-composite bar), The Japan Society of Mechanical Engineers 66 (649), 1806–1811.
[43] M.-F.Khansanami ,M. Jabbari ,Torsion of poroelastic shaft with hollow elliptical section, JSM Journal of solid Mechanics Vol.8, No.1 (2016)pp.1-11
[44] H.-sadd.Martin,2009, Elasticity theory, application and numeric, second ed .Department of mechanical engineering and applied mechanics university of Rhode Island, 229-232
