Assessment of VSM Scenarios by Simulation of Logistics Systems in Petrochemical Company

Subject Areas : Business Strategy

Mohsen Parhizgar ¹ ( Department of Industrial Management, Marvdasht Branch,Islamic Azad University, Marvdasht, Iran )

Received: 2013-12-01 Accepted : 2015-10-03 Published : 2017-04-01

Keywords: Simulation, Optimization, Value Stream Mapping, Logistics Equipment, Material Handling Cost,

Abstract :

Believe that VSM involves the concurrent improve of processes, organizations, and their supporting information systems to achieve radical improvement in time, cost, quality, and customer’s regard for the company’s products and services. Nowadays, simulation is the most important way to do VSM and improving logistics processes. A time study was performed by measuring the time duration per process and identifying different time drivers from direct observation, interviews and time templates. These results were then consolidated in to a generalized framework (simulated process) that was used to optimize material handling time and cost in logistics processes. In this paper, the process of loading, unloading and movement of the containers, in the firm has been studied. The aim of this study is to determine the maximum efficiency of process and movement equipment’s and also to minimized the cost and time for this purpose. Simulation and VSM processes have been used to study this system regarding the complexities of the logistics processes. At the end by designing and implementing of model in ARENA software, the results of implemented simulation, by study of alternatives have been analyzed. Finally, current optimization leads to increase efficiency inthe firm’s logistics and reduction of approximately 12% of the logistics costs and 35% of process cycle time.

References:

Ahmadi, Alireza; (2007). Work Study, TEHRAN; Iran University Science and Technology.Assessment of VSM Scenarios by Simulation of Logistics Systems in ... 131

 Banks,  J., "INTRODUCTION  TO SIMULATION",  Winter Simulation Conference,  1999, PP 7-13.

 Brown, Adam; Amundsen, Joseph     ;   Badurdeen,    Fazleena;  (2014).Sustainable  value   stream   mapping (Sus-VSM)  in  different manufacturing system configurations. Journal of Cleaner Production, xxx, 1-16.

 Chen, James C.; Cheng, Chen-Huan; Huang, PoTsangB.; (2013). Supply chain management  with lean production and RFID application:  A case study. ExpertSystems with Applications, 40, 3389-3397.

 Diaz-Elsayed, Nancy; Jondral, Annabel; Greinacher, Sebastian; Dornfeld, David; Lanza, Gisela;  (2013).  Assessment    of   lean  and   green strategies   by  simulation   of  manufacturing   systems in  discrete production   environments. CIRP Annals-Manufacturing  Technology,62, 475-478.

 Donselaar,  Karel van; Zelst,  Susan van; Woensel,  Tom van; Broekmeulen, Rob; Fransoo,  Jan; (2006).  Logistics  drivers for shelf stacking in grocery retail stores. International  Journal of production economics, 121, PP.620-632, The Netherlands.

 Gracanin, Danijela; Buchmeister, Borut; and Lalic, Bojan, (2014). Using Cost-Time   Profile  for   Value   Stream  Optimization. Procedia Engineering, 69, 1225-1231.

 Heydari, Jafar; (2014).  Lead time variation control using   reliable shipment   equipment:    An   incentive scheme   for  supply   chain coordination. TransportationResearchPart E, 63, 44-58.

 Jalali, Ali; (translator) (2007). The integrated management system IMS.[27] TEHRAN: D.A.S. IRAN.

 Kelton, David; Saduski, Randal;  stark, David; (2011).  Simulation with Arena software (Bagheri Mohsen; Sibouyeh Ali; Hejazi Taha hosein; Trans.),  Mashhad;  publishing  Farazyar (original  work published 2006).

 Parhizgar, Mohsen; Soukhakian, M.Ali; Gerami, Javad; (2013). Shipping Service Optimization  in Pars  Petrochemical  Port-Assalouyeh  withUsing  Queuing  Theory and Simulation.  Shiraz  Journal  of  SystemManagement, 4, 1-12.

 Por  Fritzson,  David; Dietersdottir,  Kria Susanna;  (2012).  Analyzing administrative  processes  in a  3PL company  mapping  of administrative   processes  and  identification   of  key  time drivers. “Master thesis”, CHALMERS UNIVERSITY OF TECHNOLOGY, Department of Technology Management and Economics, Sweden.

 Rathmell, J., Sturrock,  D.T.,  "THE  ARENA   PRODUCT   FAMILY: ENTERPRISE  MODELING SOLUTIONS", Winter Simulation Conference, (2002), PP 165-172.

 Rushton,  Alan; Baker, Peter; Croucher, phil; (2006).  The handbook  of LOGISTICS and DISTRIBUTION Management; The Chartered Institute of Logistics and Transport. London: United Kingdom.

 Shokouhyar,  Sajad;  (2005). Provide a model policy  controls  the supply chain work in progress (CONWIP). “Unpublished master’s thesis”, Amir Kabir Industrial University, Tehran.

 Tomasini,  Rolando M.;  Wassenhove,   Luk   N.  Van;  (2009).  From preparedness to partnerships:  case study research on humanitarian logistics,   international   transaction   in  operational research,   16, PP549–559.

 Venkataraman, K.; Ramnath, B.Vijaya; Kumar, V.Muthu; Elanchezhian, C. (2014). Application of Value Stream Mapping  for Reduction of Cycle Time in a Machining Process. ProcediaMaterials Science, 6,1187-1196.

 Xin, Jianbin; Negenborn,  Rudy R.; Lodewijks, Gabriël; (2014). Energy- aware control for automated  container  terminals  using Integrated flow shop scheduling and optimal control. TransportationResearch Part C, 44, 214-230.

 Zandin; (1994). Time measuring through  MOST (Arab Shomali; Javid; Trans.),Yazd; Mesbah (original work published 1993).

 Zhoua, Wei-Hua;  Lee, Chung-Yee; (2009). Pricing and competition in a transportation  market with empty equipment  repositioning. TransportationResearchPart B, 43, 677-691