Design of Folded-Cascode Low Noise Amplifier with low power and high gain for UWB application

Subject Areas : Majlesi Journal of Telecommunication Devices

Meysam  Azimi-Roein ¹ ()
Zahra  Mostafavi Darani ² ()

Received: 2018-07-26 Accepted : 2018-09-17 Published : 2018-09-01

Keywords: noise figure, folded-cascode, UWB, LNA,

Abstract :

ABSTRACT: This paper presents the low noise amplifier for ultra wide-band applications.the UWB LNA is design in 0.18µm CMOS technique to achieve low noise figure ,low power consumption and high gain. To attain the low power dissipation and low supply voltage,foldedcascode with current reused technique is utilized in first stage. Negative feedback is adopted to extend the bandwidth. using the proposed technique ,a maximum gain of 12.7 dB and minimum noise figure of 2dB is achieved. The total power consumption is37 mW.S11 and S22 are less than -10 dB.

References:

1. Y.Lu,K.S.Yeo,A.Cabuk,J.Ma,M.A.Do and Z.Lu, A Novel CMOS Low-Noise Amplifier Design for 3.1 to10.6 GHZ Ultra wideband Wireless Receiver, IEEETrans.circuits Syst.I papers vol.53,no.8,pp1683-1691,Aug 2006

2. B . Razavi. Cognitive radio design challenges and techniques, IEEE J. Solid-State Circuits vol.45, PP.1542–1553, Aug 2010

3. Dong Huang, Shengxi Diao,Weiqiang Qian,Fujiang Lin. A resistive-feedback LNA in 65 nm CMOS With a gate inductor for bandwidth extension, Journal Microelectronics ,vol.46,pp103-110, January 2015.

4. Qiuzhen Wan, Chunhua Wang, Design of 3.1-10.6 GHz ultra-wideband CMOS low noise amplifier with current reuse technique, International Journal of Electronic and Communications, Vol.65, No.1, pp. 1006-1011, December 2011.

5. M.T.Reiha and J.R.Long, A 1.2V reactive-feedback 3.1- 10.6GHz low noise amplifier in 0.13-µm CMOS, IEEE Journal of Solid-State Circiuts, vol.42,No.5, pp.1023-1033,may2007.

6. H.Zhang, A Low-power,Linearized,Ultra-Wideband LNA Design Technique,IEEE Journal of Solid-State Circuit,Vol.44,NO.2,PP.320-330.Feb. 2009.

7. Meng-Ting Hsu,Yi-Cheng Chang and Yu-Zhang Huang, Design of low power uwb lna based on common source topology with current-reused technique, Microelectronics Journal,vol.44, pp. 1223-1230,Feb.2013

8. K,-H Chen and S.-I Li. Inductor Less Wideband CMOS Low-Noise Amplifiers Using NoiseCancelling Technique, IEEE Trans.Circuits Syst.I papers vol.59,no.2,PP.305-314. Feb. 2012.

9. A.Tanaka et al.,“A 1.1 V 3.1-9.5 GHz MB-OFDM UWB transceiver in 90 nm CMOS”, Journal Solid-State circuits, pp. 120-121, 2004.

10. Ke-Hou Chen et al., "An Ultra-Wide-Band 0.4-10 GHz LNA in 0.18μm CMOS", IEEE Circuits and systems. Vol.54, No. 3, pp. 217-221, 2007.

11. Dong Huang, Shengxi Diao,Weiqiang Qian,Fujiang Lin.”A resistive-feedback LNA in 65 nm CMOS With a gate inductor for bandwidth extension”, Microelectronics Journal ,vol.46,pp103-110,2015.

12. H.L.Kao,K.C Chang, Very low power CMOS LNA for UWB wireless receivers using current reused topology, Science-Direct 2007 Elsevier Ltd,solid-state Electron,vol.52,pp.86-90,2008.