Effect of the Interparticle Interactions on Adsorption-Induced Frequency Shift of Nano-beam-Based Nanoscale Mass-Sensors: A Theoretical Study

Subject Areas : Engineering

K Rajabi ¹ (Department of Mechanical Engineering, College of Engineering, Sanandaj Branch, Islamic Azad University, Sanandaj, Iran)
Sh Hosseini-Hashemi ² (School of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran)

Received: 2018-07-30 Accepted : 2018-10-03 Published : 2018-12-30

Keywords: Euler-Bernoulli beam theory, Nanoscale mass-sensors, Nano-beam resonators, Nano-cantilever resonators, Physisorption effects,

Abstract :

It is well-known that the Interparticle interactions between adsorbates and surface of an adsorbent can affect the surface morphology. One of the consequences of this issue is that the resonant frequency of a nanoscale resonator can be changed due to adsorption. In this study we have chosen a cantilever-based nanoscale mass-sensor with a single nanoparticle at its tip. Using the classical continuum mechanics and the Euler-Bernoulli beam theory we have derived the governing equation of free vibration of the proposed sensor. By the assumption of physisorption, the weak van der Waals forces between the attached nanoparticle and the upper surface atoms have been taken into account. Effect of this interparticle interaction on the frequency response of the mass sensor is examined. Accordingly, the classical equation of motion has been modified by an additional termon the dynamics behavior of the sensor with a variable coefficient. It has been shown that the effect of this additional term is the same as that of an elastic foundation with variable modulus. Numerical results have shown that this additional term has significant effect on the frequency shift of a nanoscale mass-sensor in such a way that by approaching the nanoparticle towards the sensor, the frequency shift of the sensor will increase significantly. The smaller is the nanoparticle, the higher is the frequency shift.

References:

[1] Irudayarar J.M., 2012, Biomedical Nano-sensors, CRC Press.
[2] Fraden J., 2004, Handbook of Modern Sensors: Physics, Designs, and Applications, Springer Science & Business Media.
[3] Zhang Y., 2013, Determining the adsorption-induced surface stress and mass by measuring the shifts of resonant frequencies, Sensors and Actuators A: Physical 194: 169-175.
[4] Mehdipour I., Barari A., Domairry G., 2011, Application of a cantilevered SWCNT with mass at the tip as a nanomechanical sensor, Computational Materials Science 50(6): 1830-1833.
[5] Hwang D.G., 2016, Label-free detection of prostate specific antigen (PSA) using a bridge-shaped PZT resonator, Microsystem Technologies 23(5).
[6] Bouchaala A., Nayfeh A.H., Younis M.I., 2016, Frequency shifts of micro and nano cantilever beam resonators due to added masses, Journal of Dynamic Systems, Measurement, and Control 138(9): 091002.
[7] Mehdipour I., Barari A., 2012, Why the center-point of bridged carbon nanotube length is the most mass sensitive location for mass attachment? Computational Materials Science 55: 136-141.
[8] Mehdipour I., Erfani-Moghadam A., Mehdipour C., 2013, Application of an electrostatically actuated cantilevered carbon nanotube with an attached mass as a bio-mass sensor, Current Applied Physics 13: 1463-1469.
[9] Kiani K., 2014, Magnetically affected single-walled carbon nanotubes as nanosensors, Mechanics Research Communications 60: 33-39.
[10] Kiani K., 2015, Nanomechanical sensors based on elastically supported double-walled carbon nanotubes, Applied Mathematics and Computation 270: 216-241.
[11] Heinrich S.M., Dufour I., 2015, Toward higher-order mass detection_influence of an adsorbate's rotational inertia and eccentricity on the resonant response of a bernoulli-euler cantilever beam, Sensors 15: 29209-29232.
[12] Gheshlaghi B., Hasheminejad S.M., 2011, Adsorption-induced resonance frequency shifts in Timoshenko micro-beams, Current Applied Physics 11(4): 1035-1041.
[13] Hu K. M., 2016, Adsorption-induced surface effects on the dynamical characteristics of micromechanical resonant sensors for in situ real-time detection, Journal of Applied Mechanics 83(8): 081009.
[14] Tamayo J., 2006, Effect of the adsorbate stiffness on the resonance response of micro-cantilever sensors, Applied Physics Letters 89(22): 224104.
[15] Zhang J. Q., Yu S. W., Feng X. Q., 2008, Theoretical analysis of resonance frequency change induced by adsorption, Journal of Physics D: Applied Physics 41(12): 125306.
[16] Israelachvili J.N., 2011, Intermolecular and Surface Forces, San Diego, Academic Press.
[17] Martinez R.E., Augustyniak W.M., Golovchenko J.A., 1990, Direct measurement of crystal surface stress,Physical Review Letters 64(9): 1035.
[18] Baowan D., 2017, Modelling and Mechanics of Carbon-based Nanostructured Materials, William Andrew.
[19] Bahrami M., Hatami S., 2016, Free and forced transverse vibration analysis of moderately thick orthotropic plates using spectral finite element method, Journal of Solid Mechanics 8(4): 895-915.
[20] Shu C., 2012, Differential Quadrature and its Application in Engineering, Springer Science & Business Media.
[21] Goodarzi M., 2016, Thermo-mechanical vibration analysis of FG circular and annular nanoplate based on the visco-pasternak foundation, Journal of Solid Mechanics 8(4): 788-805.
[22] Torabi K., Afshari H., 2016, Generalized differential quadrature method for vibration analysis of cantilever trapezoidal FG thick plate, Journal of Solid Mechanics 8(1): 184-203.
[23] Rajabi K., Hosseini-Hashemi S., 2017, A new nanoscale mass sensor based on a bilayer graphene nanoribbon: The effect of interlayer shear on frequencies shift, Computational Materials Science 126: 468-473.