Non-Axisymmetric Time-Dependent Creep Analysis in a Thick-Walled Cylinder Due to the Thermo-mechanical loading
Subject Areas : Engineering
1 - Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
2 - Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
Keywords: Thick-walled cylinder, Time-dependent creep, Stainless Steel 316, Thermal and mechanical loads, Non-axisymmetric loading,
Abstract :
In this study, the non-linear creep behaviour of a thick-walled cylinder made of stainless steel 316 is investigated using a semi-analytical method. The thick-walled cylinder is under a uniform internal pressure and a non-axisymmetric thermal field as a function of the radial and circumferential coordinates. For the high temperature and stress levels, creep phenomena play a major role in stress redistributions across the cylinder thickness. The Bailey-Norton creep constitutive equation is used to model the uniaxial creep behaviour of the material. Creep strain increments are accumulated incrementally during the life of the vessel. Creep strain increments are related to the current stresses and the material uniaxial creep model by the well-known Prandtl-Reuss relations. Considering the mentioned non-axisymmetric boundary conditions, the heat conduction equation and the Navier partial differential equations has been solved using the separation of variables and the complex Fourier series methods. The corresponding displacement, strain and stress functions are obtained. Considering the non-axisymmetric loadings, the distribution of the radial, circumferential and shear stresses are studied. Furthermore, the effects of internal pressure and external temperature distribution on the effective stress history are investigated. It has been found that the non-axisymmetric thermal loading has a significant effect on stress redistributions.
Loghman A., Shokouhi N., 2009, Creep damage evaluation of thick-walled spheres using a long-term creep constitutive model, Journal of Mechanical Science and Technology 23(10): 2577-2582.
[2] Moon H., Kim K.M., Jeon Y.H., Shin S., Park J.S., Cho H.H., 2014, Effect of thermal stress on creep lifetime for a gas turbine combustion liner, Engineering Failure Analysis 47(1): 34-40.
[3] Zhu S.P., Huang H.Z., He L.P., Liu Y., Wang Z., 2012, A generalized energy-based fatigue–creep damage parameter for life prediction of turbine disk alloys, Engineering Fracture Mechanics 90(1): 89-100.
[4] Wang W., Buhl P., Klenk A., 2015, A unified viscoplastic constitutive model with damage for multi-axial creep–fatigue loading, International Journal of Damage Mechanics 24(3): 363-382.
[5] Roy N., Das A., Ray A., 2015, Simulation and quantification of creep damage, International Journal of Damage Mechanics 24(7): 1086-1106.
[6] Kobelev V., 2014, Some basic solutions for nonlinear creep, International Journal of Solids and Structures 51(19): 3372-3381.
[7] Nejad M.Z., Kashkoli M.D., 2014, Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux, International Journal of Engineering Science 82(1): 222-237.
[8] Kashkoli M.D., Nejad M.Z., 2015, Time-dependent thermo-elastic creep analysis of thick-walled spherical pressure vessels made of functionally graded materials, Journal of Theoretical and Applied Mechanics 53(4): 1053-1065.
[9] Loghman A., Azami M., 2016, A novel analytical-numerical solution for nonlinear time-dependent electro-thermo-mechanical creep behavior of rotating disk made of piezoelectric polymer, Applied Mathematical Modelling 40(7): 4795-4811.
[10] Chen Y., Lin X., 2008, Elastic analysis for thick cylinders and spherical pressure vessels made of functionally graded materials, Computational Materials Science 44(2): 581-587.
[11] Dai H., Fu Y., 2007, Magnetothermoelastic interactions in hollow structures of functionally graded material subjected to mechanical loads, International Journal of Pressure Vessels and Piping 84(3): 132-138.
[12] Tarn J.Q., 2001, Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads, International Journal of Solids and Structures 38(46): 8189-8206.
[13] Jabbari M., Sohrabpour S., Eslami M., 2003, General solution for mechanical and thermal stresses in a functionally graded hollow cylinder due to non-axisymmetric steady-state loads, Journal of Applied Mechanics 70(1): 111-118.
[14] Shao Z., Ang K., Reddy J., Wang T., 2008, Nonaxisymmetric thermomechanical analysis of functionally graded hollow cylinders, Journal of Thermal Stresses 31(6): 515-536.
[15] Ootao Y., Ishihara M., 2013, Asymmetric transient thermal stress of a functionally graded hollow cylinder with piecewise power law, Structural Engineering & Mechanics 47(3): 421-442.
[16] Loghman A., Nasr M., Arefi M., 2017, Non-symmetric thermomechanical analysis of a functionally graded cylinder subjected to mechanical, thermal, and magnetic loads, Journal of Thermal Stresses 40(6): 765-782.
[17] Meshkini M., Firoozbakhsh K., Jabbari M., SelkGhafari A., 2017, Asymmetric mechanical and thermal stresses in 2D-FGPPMs hollow cylinder, Journal of Thermal Stresses 40(4): 448-469.
[18] Kashkoli M.D., Tahan K.N., Nejad M.Z., 2017, Time-dependent thermomechanical creep behavior of FGM thick hollow cylindrical shells under non-uniform internal pressure, Journal of Applied Mechanics 9(6): 1750086.
[19] Sreenivasan P.R., 2013, Hot tensile data and creep properties derived there-from for 316L(N) stainless steel with various nitrogen contents, Procedia Engineering 55(1): 82-87.
[20] Kim B.J., 2013, Small punch creep behavior and nondestructive evaluation of long term aged AISI 316L stainless steel, International Journal of Precision Engineering and Manufacturing 14(7): 1267-1270.
[21] Guo J., Shi H., Meng W., 2013, Prediction methodology of creep performance from stress relaxation measurements, Applied Mechanics and Materials 401(1): 920-923.
[22] Loghman A., Moradi M., 2013, The analysis of time-dependent creep in FGPM thick walled sphere under electro-magneto-thermo-mechanical loadings, Mechanics of Time-Dependent Materials 17(3): 315-329.
[23] Loghman A., Aleayoub S.M.A., Sadi M.H., 2011, Time-dependent magnetothermoelastic creep modeling of FGM spheres using method of successive elastic solution, Applied Mathematical Modelling 36(2): 836-845.
[24] Loghman A., Ghorbanpour Arani A., Amir S., Vajedi A., 2010, Magnetothermoelastic creep analysis of functionally graded cylinders, International Journal of Pressure Vessels and Piping 87(7): 389-395.
[25] Ganesan V., Mathew M.D., Rao K.B.S., 2009, Influence of nitrogen on tensile properties of 316LN SS, Journal of Materials Science and Technology 25(5): 614-618.
[26] Jiang W., Zhang Y., Woo W., 2012, Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: Finite element simulation, International Journal of Pressure Vessels and Piping 92(1): 56-62.
[27] Penny R.K., Marriott D.L., 2012, Design for Creep, Springer Science & Business Media, New York.
[28] Incropera F.P., De Witt D.P., 1985, Fundamentals of Heat and Mass Transfer, John Wiley and Sons Inc, New York.
[29] Kumar J.G., Ganesan V., Laha K., Mathew M.D., 2013, Time dependent design curves for a high nitrogen grade of 316LN stainless steel for fast reactor applications, Nuclear Engineering and Design 265(1): 949-956.