An Analytical Solution on Size Dependent Longitudinal Dynamic Response of SWCNT Under Axial Moving Harmonic Load
Subject Areas : EngineeringF Khosravi 1 , M Simyari 2 , S. A Hosseini 3 , M Ghadiri 4
1 - Department of Aerospace Engineering, K.N. Toosi University of Technology, Tehran, Iran
2 - Department of Mechanical Engineering, University of Tehran, Tehran, Iran
3 - Department of Industrial, Mechanical and Aerospace Engineering, Buein Zahra Technical University, Buein Zahra, Qazvin, Iran
4 - Faculty of Engineering, Department of Mechanics, Imam Khomeini International University, Qazvin, Iran
Keywords: Galerkin Method, Axial vibration, Forced vibration, Moving load, Free vibration, Harmonic load, size dependent,
Abstract :
The main purposes of the present work are devoted to the investigation of the free axial vibration, as well as the time-dependent and forced axial vibration of a SWCNT subjected to a moving load. The governing equation is derived through using Hamilton's principle. Eringen’s nonlocal elasticity theory has been utilized to analyze the nonlocal behaviors of SWCNT. A Galerkin method based on a closed-form solution is applied to solve the governing equation. The boundary conditions are considered as clamped-clamped (C-C) and clamped-free (C-F). Firstly, the nondimensional natural frequencies are calculated, as well as the influence of the nonlocal parameter on them are explained. The results of both boundary conditions are compared together, and both of them are compared to the results of another study to verify the accuracy and efficiency of the present results. The novelty of this work is related to the study of the dynamic forced axial vibration due to the axial moving harmonic force in the time domain. The previously forced vibration studies were devoted to the transverse vibrations. The effect of the geometrical parameters, velocity of the moving load, excitation frequency, as well as the small-scale effect, are explained and discussed in this context. According to the lack of accomplished studies in this field, the present work has the potential to be used as a benchmark for future works.
Kroto H.W., 1985, C60: Buckminsterfullerene, Nature 318: 162-163.
[2] Krätschmer W., 1990, Solid C60: a new form of carbon, Nature 347: 354-358.
[3] Iijima S., 1991, Synthesis of Carbon Nanotubes, Nature 354: 56-58.
[4] Iijima S., Ichihashi T., 1993, Single-shell carbon nanotubes of 1-nm diameter, Nature 363: 603-605.
[5] Iijima S., 1991, Helical microtubules of graphitic carbon, Nature 354: 56-58.
[6] Lu X., Chen Z., 2005, Curved pi-conjugation, aromaticity, and the related chemistry of small fullerenes (< C60) and single-walled carbon nanotubes, Chemical Reviews 105(10): 3643-3696.
[7] Dresselhaus M., 2004, Electronic, thermal and mechanical properties of carbon nanotubes. Philosophical Transactions of the Royal Society of London, Series A: Mathematical, Physical and Engineering Sciences 362: 2065-2098.
[8] Hong S., Myung S., 2007, Nanotube electronics: A flexible approach to mobility, Nature Nanotechnology 2(4): 207-208.
[9] Bethune D., 1993, Cobalt-catalysed growth of carbon nanotubes with single-atomic-layer walls, Nature 363: 605-607.
[10] Dai H., 2002, Carbon nanotubes: opportunities and challenges, Surface Science 500 (1-3): 218-241.
[11] De Volder M.F., 2013, Carbon nanotubes: present and future commercial applications, Science 339: 535-539.
[12] Esawi A.M., Farag M.M., 2007, Carbon nanotube reinforced composites: potential and current challenges, Materials & Design 28(9): 2394-2401.
[13] Mubarak N., 2014, An overview on methods for the production of carbon nanotubes, Journal of Industrial and Engineering Chemistry 20(4): 1186-1197.
[14] Lei Z., Zhang L., Liew K., 2015, Free vibration analysis of laminated FG-CNT reinforced composite rectangular plates using the kp-Ritz method, Composite Structures 127: 245-259.
[15] Zhang L., Song Z., Liew K., 2015, State-space Levy method for vibration analysis of FG-CNT composite plates subjected to in-plane loads based on higher-order shear deformation theory, Composite Structures 134: 989-1003.
[16] Natarajan S., Haboussi M., Manickam G., 2014, Application of higher-order structural theory to bending and free vibration analysis of sandwich plates with CNT reinforced composite facesheets, Composite Structures 113: 197-207.
[17] Wang Z.-X., Shen H.-S., 2012, Nonlinear vibration and bending of sandwich plates with nanotube-reinforced composite face sheets, Composites Part B: Engineering 43(2): 411-421.
[18] Ma J., 2010, Diameters of single-walled carbon nanotubes (SWCNTs) and related nanochemistry and nanobiology, Frontiers of Materials Science in China 4(1): 17-28.
[19] Sethuraman A., Stroscio M.A., Dutta M., 2004, Potential Applications of Carbon Nanotubes in Bioengineering, Springer.
[20] Chen Y., Zhang J., 2014, Chemical vapor deposition growth of single-walled carbon nanotubes with controlled structures for nanodevice applications, Accounts of Chemical Research 47(8): 2273-2281.
[21] Fukuda T., Arai F., Dong L., 2003, Assembly of nanodevices with carbon nanotubes through nanorobotic manipulations, Proceedings of the IEEE 91(11): 1803-1818.
[22] Ma P.-C., 2010, Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review, Composites Part A: Applied Science and Manufacturing 41(10): 1345-1367.
[23] Sahoo N.G., 2010, Polymer nanocomposites based on functionalized carbon nanotubes, Progress in Polymer Science 35(7): 837-867.
[24] Zarepour M., Hosseini S.A., Ghadiri M., 2017, Free vibration investigation of nano mass sensor using differential transformation method, Applied Physics A 123(3): 181.
[25] Namvar M., 2017, Experimental and analytical investigations of vibrational behavior of U-shaped atomic force microscope probe considering thermal loading and the modified couple stress theory, The European Physical Journal Plus 132(6): 247.
[26] Sourki R., Hosseini S.A., 2017, Coupling effects of nonlocal and modified couple stress theories incorporating surface energy on analytical transverse vibration of a weakened nanobeam, The European Physical Journal Plus 132(4): 184.
[27] Refaeinejad V., Rahmani O., Hosseini S.A., 2017, Evaluation of nonlocal higher order shear deformation models for the vibrational analysis of functionally graded nanostructures, Mechanics of Advanced Materials and Structures 24(13): 1116-1123.
[28] Rahmani O., Hosseini S.A., Parhizkari M., 2017, Buckling of double functionally-graded nanobeam system under axial load based on nonlocal theory: an analytical approach, Microsystem Technologies 23(7): 2739-2751.
[29] Hayati H., Hosseini S.A., Rahmani O.,2016, Coupled twist–bending static and dynamic behavior of a curved single-walled carbon nanotube based on nonlocal theory, Microsystem Technologies 23: 2393-2401.
[30] Eringen A.C., Edelen D., 1972, On nonlocal elasticity, International Journal of Engineering Science 10(3): 233-248.
[31] Eringen A.C., 1983, On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves, Journal of Applied Physics 54(9): 4703-4710.
[32] Kahrobaiyan M., 2010, Investigation of the size-dependent dynamic characteristics of atomic force microscope microcantilevers based on the modified couple stress theory, International Journal of Engineering Science 48(12): 1985-1994.
[33] Ansari R., 2015, Surface stress effect on the vibration and instability of nanoscale pipes conveying fluid based on a size-dependent Timoshenko beam model, Acta Mechanica Sinica 31(5): 708-719.
[34] Farajpour M.R., 2016, Vibration of piezoelectric nanofilm-based electromechanical sensors via higher-order non-local strain gradient theory, Micro & Nano Letters 11(6): 302-307.
[35] Behrouz S.J., Rahmani O., Hosseini S.A., 2019, On nonlinear forced vibration of nano cantilever-based biosensor via couple stress theory, Mechanical Systems and Signal Processing 128: 19-36.
[36] Hosseini S.A., Rahmani O., 2018, Modeling the size effect on the mechanical behavior of functionally graded curved micro/nanobeam, Thermal Science and Engineering 1(2): 1-20.
[37] Rahmani O., 2018, Size dependent bending analysis of micro/nano sandwich structures based on a nonlocal high order theory, Steel and Composite Structures 27(3): 371-388.
[38] Rahmani O., 2018, Free vibration of deep curved FG nano-beam based on modified couple stress theory, Steel and Composite Structures 26(5): 607-620.
[39] Rahmani O., 2018, Dynamic response of a single-walled carbon nanotube under a moving harmonic load by considering modified nonlocal elasticity theory, The European Physical Journal Plus 133(2): 42.
[40] Ghadiri M., 2018, In-Plane and out of plane free vibration of U-shaped AFM probes based on the nonlocal elasticity, Journal of Solid Mechanics 10(2): 285-299.
[41] Hosseini S.A., Rahmani O., 2018, Bending and vibration analysis of curved FG nanobeams via nonlocal Timoshenko model, Smart Construction Research 2(2): 1-17.
[42] Xu K., Guo X., Ru C., 2006, Vibration of a double-walled carbon nanotube aroused by nonlinear intertube van der Waals forces, Journal of Applied Physics 99(6): 064303.
[43] Lee H.-L., Chang W.-J., 2009, Vibration analysis of a viscous-fluid-conveying single-walled carbon nanotube embedded in an elastic medium, Physica E: Low-Dimensional Systems and Nanostructures 41(4): 529-532.
[44] Moradi-Dastjerdi R., 2014, Vibration analysis of functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube based on mesh-free method, Journal of Composite Materials 48(15): 1901-1913.
[45] Pourseifi M., Rahmani O., Hoseini S.A., 2015, Active vibration control of nanotube structures under a moving nanoparticle based on the nonlocal continuum theories, Meccanica 50(5): 1351-1369.
[46] Mahdavi M., Jiang L., Sun X., 2011, Nonlinear vibration of a double-walled carbon nanotube embedded in a polymer matrix, Physica E: Low-Dimensional Systems and Nanostructures 43(10): 1813-1819.
[47] Kiani K., 2010, Free longitudinal vibration of tapered nanowires in the context of nonlocal continuum theory via a perturbation technique, Physica E: Low-Dimensional Systems and Nanostructures 43(1): 387-397.
[48] Askari H., Esmailzadeh E., Zhang D., 2014, Nonlinear vibration analysis of nonlocal nanowires, Composites Part B: Engineering 67: 607-613.
[49] Ansari R., Torabi J., Shojaei M.F., 2017, Buckling and vibration analysis of embedded functionally graded carbon nanotube-reinforced composite annular sector plates under thermal loading, Composites Part B: Engineering 109: 197-213.
[50] Yas M., Heshmati M., 2012, Dynamic analysis of functionally graded nanocomposite beams reinforced by randomly oriented carbon nanotube under the action of moving load, Applied Mathematical Modelling 36(4): 1371-1394.
[51] Şimşek M., 2010, Vibration analysis of a single-walled carbon nanotube under action of a moving harmonic load based on nonlocal elasticity theory, Physica E: Low-Dimensional Systems and Nanostructures 43(1): 182-191.
[52] Malekzadeh P., Zarei A., 2014, Free vibration of quadrilateral laminated plates with carbon nanotube reinforced composite layers, Thin-Walled Structures 82: 221-232.
[53] Joshi A.Y., Harsha S., Sharma S.C., 2010, Vibration signature analysis of single walled carbon nanotube based nanomechanical sensors, Physica E: Low-Dimensional Systems and Nanostructures 42(8): 2115-2123.
[54] Aydogdu M., 2012, Axial vibration analysis of nanorods (carbon nanotubes) embedded in an elastic medium using nonlocal elasticity, Mechanics Research Communications 43: 34-40.
[55] Aydogdu M., 2015, A nonlocal rod model for axial vibration of double-walled carbon nanotubes including axial van der Waals force effects, Journal of Vibration and Control 21(16): 3132-3154.
[56] Murmu T., Adhikari S., 2010, Nonlocal effects in the longitudinal vibration of double-nanorod systems, Physica E: Low-Dimensional Systems and Nanostructures 43(1): 415-422.
[57] Şimşek M., 2012, Nonlocal effects in the free longitudinal vibration of axially functionally graded tapered nanorods, Computational Materials Science 61: 257-265.
[58] Murmu T., Adhikari S., 2011, Axial instability of double-nanobeam-systems, Physics Letters A 375(3): 601-608.
[59] Danesh M., Farajpour A., Mohammadi M., 2012, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications 39(1): 23-27.
[60] Filiz S., Aydogdu M., 2010, Axial vibration of carbon nanotube heterojunctions using nonlocal elasticity, Computational Materials Science 49(3): 619-627.
[61] Mohammadian M., Abolbashari M.H., Hosseini S.M., 2019, Axial vibration of hetero-junction CNTs mass nanosensors by considering the effects of small scale and connecting region: An analytical solution, Physica B: Condensed Matter 553: 137-150.
[62] Liu K.-C., Friend J., Yeo L., 2009, The axial–torsional vibration of pretwisted beams, Journal of Sound and Vibration 321(1-2): 115-136.
[63] Aydogdu M., Filiz S., 2011, Modeling carbon nanotube-based mass sensors using axial vibration and nonlocal elasticity, Physica E: Low-Dimensional Systems and Nanostructures 43(6): 1229-1234.
[64] Bouadi A., 2018, A new nonlocal HSDT for analysis of stability of single layer graphene sheet, Advances in Nano Research 6(2): 147-162.
[65] Hamza-Cherif R., 2018, Vibration analysis of nano beam using differential transform method including thermal effect, Journal of Nano Research 54: 1-14.
[66] Kadari B., 2018, Buckling analysis of orthotropic nanoscale plates resting on elastic foundations, Journal of Nano Research 55: 42-56.
[67] Yazid M., 2018, A novel nonlocal refined plate theory for stability response of orthotropic single-layer graphene sheet resting on elastic medium, Smart Structures and Systems 21(1): 15-25.
[68] Youcef D.O., 2018, Dynamic analysis of nanoscale beams including surface stress effects, Smart Structures and Systems 21(1): 65-74.
[69] Draoui A., 2019, Static and dynamic behavior of nanotubes-reinforced sandwich plates using (FSDT), Journal of Nano Research 57: 117-135.
[70] Mokhtar Y., 2018, A novel shear deformation theory for buckling analysis of single layer graphene sheet based on nonlocal elasticity theory, Smart Structures and Systems 21(4): 397-405.
[71] Boutaleb S., 2019, Dynamic analysis of nanosize FG rectangular plates based on simple nonlocal quasi 3D HSDT, Advances in Nano Research 7(3): 189-206.
[72] Karami B., 2018, A size-dependent quasi-3D model for wave dispersion analysis of FG nanoplates, Steel and Composite Structures 28(1): 99-110.
[73] Karami B., Janghorban M., Tounsi A.,2018, Nonlocal strain gradient 3D elasticity theory for anisotropic spherical nanoparticles, Steel and Composite Structures 27(2): 201-216.
[74] Karami B., Janghorban M., Tounsi A., 2018, Variational approach for wave dispersion in anisotropic doubly-curved nanoshells based on a new nonlocal strain gradient higher order shell theory, Thin-Walled Structures 129: 251-264.
[75] Bellifa H., 2017, A nonlocal zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams, Structural Engineering and Mechanics 62(6): 695-702.
[76] Karami B., Janghorban M., Tounsi A., 2017, Effects of triaxial magnetic field on the anisotropic nanoplates, Steel and Composite Structures 25(3): 361-374.
[77] Bouafia K., 2017, A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams, Smart Structures and Systems 19(2): 115-126.
[78] Zemri A., 2015, A mechanical response of functionally graded nanoscale beam: an assessment of a refined nonlocal shear deformation theory beam theory, Structural Engineering and Mechanics 54(4): 693-710.
[79] Şimşek M., 2011, Nonlocal effects in the forced vibration of an elastically connected double-carbon nanotube system under a moving nanoparticle, Computational Materials Science 50(7): 2112-2123.