بررسی نقش ضخامت شیشه و لایه هوایی در افزایش عملکرد حرارتی بازشو پنجره در ساختمان با رویکرد اقلیمی شهر تهران
محورهای موضوعی : معماری
اشکان حسنی
1
,
شوکا خوشبخت بهرمانی
2
*
,
وحید قبادیان
3
1 - دانشجو
2 - معماری، دانشکده معماری وشهرسازی، دانشگاه آزاد اسلامی واحد تهران مرکزی ،تهران ،ایران .
3 - گروه معماری، دانشگاه آزاد اسلامی واحد تهران مرکزی
کلید واژه: بهینه سازی حرارتی پنجره ها, انتقال حرارت, اقلیم گرم و خشک تهران, شبیه سازی انرژی ساختمان, معماری پایدار,
چکیده مقاله :
در دهه‌های اخیر، بهینه‌سازی مصرف انرژی در ساختمان‌ها به دغدغه‌ای مهم در معماری و مهندسی ساختمان تبدیل شده است، به‌ویژه در مناطق گرم و خشک مانند تهران. پنجره‌ها نقش کلیدی در انتقال حرارت دارند و طراحی و انتخاب نامناسب آن‌ها منجر به افزایش مصرف انرژی (بر اثر افزایش اتلاف حرارتی) در فصول مختلف می‌شود. داده‌های کمی ناکافی و نیز عدم بهره برداری از ابزارهای تحلیلی دقیق برای بررسی پارامترهای مؤثر بر عملکرد حرارتی پنجره‌ها، سبب ایجاد خلا در دستاورد های کمی مرتبط با این حوزه گردیده است. این پژوهش با هدف ارائه یک چارچوب کمی و تحلیلی در جهت کاهش انتقال حرارتی مربوط به باز شو پنجره‌ها و نیز در راستای بهبود عملکرد حرارتی آن‌ها در ساختمان‌های مناطق گرم و خشک، به‌ویژه تهران، انجام شده است.تحقیق حاضر مبتنی بر شبیه‌سازی در نرم‌افزار Design Builder و نیز استخراج و تحلیل دستاوردهای کمیتی صورت گرفته است. پارامترهایی مانند ضخامت شیشه، تعداد و نوع لایه‌های هوای داخلی، و انواع عایق‌بندی، با استفاده از داده‌های واقعی و شرایط اقلیمی تهران مورد ارزیابی قرار گرفته اند. نتایج با استانداردهای موجود مقایسه شده تا تأثیر هر عامل مشخص گردد.نتایج نشان می‌دهد که افزایش ضخامت شیشه، طراحی بهینه لایه‌های هوایی، و استفاده از عایق مناسب می‌تواند اتلاف حرارت را به‌طور قابل‌توجهی کاهش دهد. این پژوهش، چارچوبی جامع برای طراحی پنجره‌ها ارائه داده که می‌تواند به معماران در اتخاذ تصمیمات بهینه در مراحل طراحی کمک کند. یافته‌ها به‌عنوان مرجعی برای بهبود بازشوهای نما و کاهش مصرف انرژی در ساختمان‌های مشابه اقلیمی کاربرد دارند.
In recent decades, optimizing energy consumption in buildings has become a critical concern in architecture and building engineering, particularly in hot and dry regions such as Tehran. Windows play a pivotal role in heat transfer, and improper design and selection significantly increase energy consumption across different seasons. A lack of quantitative data and precise analytical tools for assessing the parameters influencing the thermal performance of windows remains a major challenge in this field. This study aims to provide a quantitative and analytical framework to minimize heat transfer through windows and enhance their thermal performance in buildings located in hot and dry climates, with a specific focus on Tehran.The research is based on simulations conducted using DesignBuilder software. Parameters such as glass thickness, the number and type of internal air layers, and various insulation types were analyzed using real data and the climatic conditions of Tehran. The results were compared with existing standards to identify the impact of each factor.The results indicate that increasing glass thickness, optimizing the design of air layers, and utilizing appropriate insulation can significantly reduce heat loss. This study presents a comprehensive framework for window design that assists architects in making optimal decisions during the design phase. The findings serve as a valuable reference for improving facade openings and reducing energy consumption in buildings with similar climatic conditions.
Extended Abstract
Introduction
Under the heightened worldwide energy need and pressing environmental issues, construction and building design practices are undergoing considerable scrutiny. Cities, especially with desert and warm climates like Tehran, are very susceptible to excessive energy requirements due to heating and cooling activities. Of the numerous architectural features, windows are among the most effective elements that regulate heat transfer between internal and external environments. Inefficient design and inappropriate material choice for windows can largely enhance thermal loss or gain, thus contributing substantially to energy use in residential buildings.In spite of the significance of the matter, there is still a considerable deficiency of research on quantitative and site-specific investigation of thermal optimization of multi-layer window systems for the particular climate of Tehran. Thermal properties of glass layers, interstitial air gap, and the window profiles themselves are all parameters commonly examined in isolation rather than through integrated simulation methodologies. In order to fill this literature gap, the present study strives to introduce an integrated simulation-based framework that is capable of guiding the thermal design of multi-glazed windows with a special emphasis on heat balance and energy efficiency improvement.
Methodology
This research is analytical and quantitative in type, and simulation and comparison of the thermal performance of various types of double-glazed windows in an average Tehran residential building are simulated with DesignBuilder simulation software. The simulation parameters are:
- Inner and outer glass thicknesses whose values are variable (from 2 mm to 20 mm),
- A consistent 2-mm thickness of the air gap between the glasses,
- Application of PVC profiles on all types of windows.
The case study is a flat with regular spatial layout, where one living room of 29 m² is selected as the simulation zone. Boundary conditions include indoor comfort temperature ranges (12–21°C in heating, 25–28°C in cooling), lighting target (150 lux), supply rate of fresh air (10 l/s/person), and mean occupant activity (eating/drinking, metabolic factor = 0.9).
Ten window types were simulated with their glass thickness varied systematically to see the effect on thermal heat balance. The performance measure is the heat balance in kilowatts (kW), positive for gain and negative for loss.
Results and discussion
Simulation findings revealed that thermal insulation enhancement can be measured by increasing inner and outer glass panes' thickness to reduce total heat transmission across window systems. Specifically, windows with outer glass thickness between 2–10 mm showed the largest range of performance with optimum improvement of heat equilibrium at inner glass thickness ranges of 12–14 mm.
Key observations include:
- Window Type 1 (2 mm outer glass): Recorded initial heat loss as -1.72 kW. Inner glass thickness was raised to 12 mm and improved heat balance by +0.23 kW.
- Window Type 5 (10 mm outer glass): Recorded initial heat loss as -1.68 kW, which was improved by +0.22 kW when inner thickness was altered to 12 mm.
- Window Types 8–10 (outer thickness 16–20 mm): Experienced decreasing returns with improvements in performance levelling off at more than 16 mm, pointing to an economic inefficiency to spend more on improving thickness.
In both cases, the fact that a 2 mm air gap was present assisted in improving the insulating advantage but further opening of this gap (beyond the scope of this research) would be preferable. Notably, simulation results compare with research that has experienced reduced benefits once a barrier of glass thickness is passed and has emphasized the importance of economic in addition to thermal performance.
The final-deliverables are 10 synthesizing data matrices of combining glass thickness and corresponding thermal balance, together with technical drawings showing each window design.
Conclusion
The paper provides a comprehensive simulation-based approach to thermal performance analysis and optimization of double-glazed window systems for hot and dry urban climates. The key findings are that:
- Thermal resistance improves with increasing inner and outer glass thickness, but the gain saturates after 12–16 mm.
- 12–16 mm outer pane thickness in the windows provides the optimum cost-thermal efficiency ratio.
- Inner thicknesses of spectacles are also implicated, and 12 mm is a satisfactory value for most applications.
The matrices and technical reports outlined here can be an important aid to architectural decision-making at the design stage. Additionally, the research provides raw material for subsequent studies of cost-benefit analysis, lifecycle analysis, and long-term durability of materials.
1. Abdelhameed, A. T., & Alharari, A. A. (2020). Numerical Analysis of the Effect of Various Window Parameters on the Thermal Performance of a Double Glaze Window in the Climatic Region of Libya.
2. Aguilar-Santana, J., Velasco-Carrasco, M., & Riffat, S. (2020). Thermal Transmittance (U-value) Evaluation of Innovative Window Technologies. Future Cities and Environment, 6. https://doi.org/10.5334/fce.99
3. Bae, M., Lee, Y., Choi, G., Kim, S., & Kang, J. (2020). Analysis of the Calculation Method for the Thermal Transmittance of Double Windows Considering the Thermal Properties of the Air Cavity. Sustainability, 12(24).
4. Banionis, K., Kumžienė, J., Burlingis, A., Ramanauskas, J., & Paukštys, V. (2021). The Changes in Thermal Transmittance of Window Insulating Glass Units Depending on Outdoor Temperatures in Cold Climate Countries. Energies, 14(6).
5. Berardi, U., Kisilewicz, T., Kim, S., Lechowska, A., Paulos, J., & Schnotale, J. (2020). Experimental and numerical investigation of the thermal transmittance of PVC window frames with silica aerogel. Journal of Building Engineering, 32, 101665. https://doi.org/https://doi.org/10.1016/j.jobe.2020.101665
6. Danesh, M., Escamilla, E., Pariafsai, F., & Ostadalimakhmalbaf, M. (2019). Characteristics of Glazing Layers of Double-Skin Facades and Energy Consumption: A Case Study in Arid Climate of Tehran.
7. Ebadati, M., Lork, A., & Alizade Elizei, M. H. (2023). Energy efficiency of residential buildings in Tehran climate by saving energy. International Journal of Ambient Energy, 44(1), 177-185. https://doi.org/10.1080/01430750.2022.2125438
8. Heydari, A., Sadati, S. E., & Gharib, M. R. (2021). Effects of different window configurations on energy consumption in building: Optimization and economic analysis. Journal of Building Engineering, 35, 102099. https://doi.org/https://doi.org/10.1016/j.jobe.2020.102099
9. Hoseinzadeh, S. (2019). Thermal Performance of Electrochromic Smart Window with Nanocomposite Structure Under Different Climates In Iran. Micro and Nanosystems, 11, 154-164. https://doi.org/10.2174/1876402911666190218145433
10. Khatibi, A., Jahangir, M. H., & Astaraei, F. R. (2023). Developing an IoT-based electrochromic windows for smart buildings. Advances in Building Energy Research, 17(2), 193-222. https://doi.org/10.1080/17512549.2023.2175371
11. Kirankumar, G., Saboor, S., Vali, S. S., Mahapatra, D., Talanki Puttaranga Setty, A. B., & Kim, K.-H. (2020). Thermal and cost analysis of various air filled double glazed reflective windows for energy efficient buildings. Journal of Building Engineering, 28, 101055. https://doi.org/https://doi.org/10.1016/j.jobe.2019.101055
12. Lechowska, A. A., Schnotale, J. A., & Baldinelli, G. (2017). Window frame thermal transmittance improvements without frame geometry variations: An experimentally validated CFD analysis. Energy and Buildings, 145, 188-199. https://doi.org/https://doi.org/10.1016/j.enbuild.2017.04.002
13. Li, D., Zhang, C., Li, Q., Liu, C., Arıcı, M., & Wu, Y. (2020). Thermal performance evaluation of glass window combining silica aerogels and phase change materials for cold climate of China. Applied Thermal Engineering, 165, 114547. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2019.114547
14. Paulos, J., & Berardi, U. (2020). Optimizing the thermal performance of window frames through aerogel-enhancements. Applied Energy, 266, 114776. https://doi.org/https://doi.org/10.1016/j.apenergy.2020.114776
15. Perumal, S., Rajendrian, S., Vijayan, V., Dinesh, s., & Pandiyan, L. (2020). Experimental study about thermal resistance and heat transfer analysis regarding air gap between two glasses on window for the domestic use. Thermal Science, 24, 31-31. https://doi.org/10.2298/TSCI190411031P
16. Saadatian, S., Simões, N., & Freire, F. (2021). Integrated environmental, energy and cost life-cycle analysis of windows: Optimal selection of components. Building and Environment, 188, 107516. https://doi.org/https://doi.org/10.1016/j.buildenv.2020.107516
17. Shaik, S., Kirankumar, G., Ghosh, A., Arumugam, C., & Ramana, M. (2021). Energy Savings and Carbon Emission Mitigation Prospective of Building's Glazing Variety, Window-to-Wall Ratio and Wall Thickness. Energies, 14, 1-19. https://doi.org/10.3390/en14238020
18. Sourav Kumar, S. A., Harpreet Singh, Kaustuv Shandilya, Pema, Sunny Kaura. REVIEW ON WINDOWS OPTIMIZATION FOR ENERGY EFFICIENT BUILDINGS. International Journal of Emerging Technologies and Innovative Research (www.jetir.org), 8(4), 20-27.
19. Takada, K., Hayama, H., Mori, T., & Kikuta, K. (2021). Thermal insulated PVC windows for residential buildings: feasibility of insulation performance improvement by various elemental technologies. Journal of Asian Architecture and Building Engineering, 20(3), 340-355. https://doi.org/10.1080/13467581.2020.1798773
20. Van Den Bossche, N., Buffel, L., & Janssens, A. (2015). Thermal Optimization of Window Frames. Energy Procedia, 78, 2500-2505. https://doi.org/10.1016/j.egypro.2015.11.251
21. Xu, X., Xie, J., Zhang, X., Gao, S., Cao, Y., & Liu, J. (2023). Optimal selection of window components in China based on energy performance modeling. Energy and Buildings, 297, 113400. https://doi.org/https://doi.org/10.1016/j.enbuild.2023.113400