Production Constraints Modelling: A Tactical Review Approach

Subject Areas : Strategic Management

Chinedum  Mgbemena ¹ (Federal University of Petroleum Resources Effurun, Nigeria)
Emmanuel  Chinwuko ² (Department of Industrial/Production Engineering, Nnamdi Azikiwe University, Awka, Anambra State, Nigeria)
Henry  Ifowodo ³ (Department of Industrial/Production Engineering, Nnamdi Azikiwe University, Awka, Anambra State, Nigeria)

Received: 2018-05-02 Accepted : 2019-03-03 Published : 2020-06-01

Keywords: Non-linear, production, Models, Constraints, Programming, Linear, TOC,

Abstract :

A constraint is a limitation or a restriction that poses a threat to the performance and efficiency of a system. This paper presented a tactical review approach to production constraints modeling. It discussed the theory of constraints (TOC) as a thinking process and continuous improvement strategy to curtail constraints in other to constantly increase the performance and efficiency of a system. It also x-rayed the working process of implementing the TOC concept which consists of five steps called “Process of On-Going Improvement”. Furthermore, it talked about constraints programming and constraints-based models which were explained to some details. Finally, production constraints model formulation procedures for linear programming and non-linear programming scenarios were extensively discussed with reference to published literature as instances of production constraints modeling were also cited.

References:

Aguilar-Escobar, V.-G., Garrido-Vega, P., & González-Zamora, M.-M. (2016). Applying the theory of constraints to the logistics service of medical records of a hospital. European Research on Management and Business Economics, 22(3), 139–146. https://doi.org/10.1016/j.iedee.2015.07.001

Bartak, R. (1998). On-line guide to constraint programming. Retrieved March 29, 2018, from http://ktiml.mff.cuni.cz/~bartak/constraints/

Barták, R. (n.d.). Dynamic Constraint Models for Complex Production Environments. Retrieved from https://ktiml.mff.cuni.cz/~bartak/downloads/ERCIM99.pdf

Blackstone, J. H. (2001). Theory of constraints - A status report. International Journal of Production Research, 39(6), 1053–1080. https://doi.org/10.1080/00207540010028119

Coman, A., & Ronen, B. (2000). Production outsourcing: A linear programming model for the Theory-Of-Constraints. International Journal of Production Research, 38(7), 1631–1639. https://doi.org/10.1080/002075400188762

Cyplik, P., Hadaś, Ł., & Domański, R. (2009). IMPLEMENTATION OF THE THEORY OF CONSTRAINTS IN THE AREA OF STOCK MANAGEMENT WITHIN THE SUPPLY CHAIN – A CASE STUDY. Electronic Scientific Journal of Logistics, 5(3), 1–12. Retrieved from http://www.logforum.net/vol5/issue3/no6

Ellis, S. C. (2011). A Theory of Constraints Service Systems Improvement Method: Case of the Airline Turnaround Problem. Florida International University. https://doi.org/10.25148/etd.FI11051601

Goldratt, E. . (1990). What is this Thing called Theory of Constraints? :: Goldratt Marketing. Croton-on-Hudson: North River Press. Retrieved from https://www.toc-goldratt.com/en/product/what-is-this-thing-called-theory-of-constraints

Gupta, M. (2003). Constraints management--recent advances and practices. International Journal of Production Research, 41(4), 647–659. https://doi.org/10.1080/0020754031000065458

Gupta, S., & Starr, M. (2014). Production and Operations Management Systems. Boca Raton: CRC Press Taylor & Francis Group. Retrieved from http://books.google.com/books?id=8KSNAgAAQBAJ&pgis=1

Hazem, H., & Farouk, A. (2016). The Application Of Theory Of Constraints In A Production Planning Process.

Hossain, A. (n.d.). Production Problem -Constraints on resources -Make products within constraints -Maximize profit from production. Retrieved from https://www3.nd.edu/~gmadey/opt2016/resources/chapter_1_ampl.pdf

Huang, S.-Y., Chen, H.-J., Chiu, A.-A., & Chen, C.-P. (2014). The application of the theory of constraints and activity-based costing to business excellence: the case of automotive electronics manufacture firms. Total Quality Management & Business Excellence, 25(5–6), 532–545. https://doi.org/10.1080/14783363.2013.820023

Izmailov, A. (2014). If Your Company is Considering the Theory of Constraints. Procedia - Social and Behavioral Sciences, 150, 925–929. https://doi.org/10.1016/j.sbspro.2014.09.103

Kujawińska, A., Rogalewicz, M., & Diering, M. (2016). Application of Expectation Maximization Method for Purchase Decision-Making Support in Welding Branch. Management and Production Engineering Review, 7(2). https://doi.org/10.1515/mper-2016-0014

Lever, J., Wallace, M., & Richards Ic-Parc, B. (1995). Constraint Logic Programming for Scheduling and Planning. Appears in BT Technology Journal, 13(1). Retrieved from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.44.5419&rep=rep1&type=pdf

Naor, M., Bernardes, E. S., & Coman, A. (2013). Theory of constraints: is it a theory and a good one? International Journal of Production Research, 51(2), 542–554. https://doi.org/10.1080/00207543.2011.654137

Okutmuş, E., Kahveci, A., & Kartašova, J. (2015). Using theory of constraints for reaching optimal product mix: An application in the furniture sector. Intellectual Economics, 9(2), 138–149. https://doi.org/10.1016/J.INTELE.2016.02.005

Puche, J., Ponte, B., Costas, J., Pino, R., & de la Fuente, D. (2016). Systemic approach to supply chain management through the viable system model and the theory of constraints. Production Planning & Control, 27(5), 421–430. https://doi.org/10.1080/09537287.2015.1132349

Reid, R. A. (2007). Applying the TOC five‐step focusing process in the service sector. Managing Service Quality: An International Journal, 17(2), 209–234. https://doi.org/10.1108/09604520710735209

RONEN, B., & SPECTOR, Y. (1992). Managing system constraints: a cost/utilization approach. International Journal of Production Research, 30(9), 2045–2061. https://doi.org/10.1080/00207549208948137

Sereshti, N., Bijari, M., & Moslehi, G. (2012). A Mathematical Model for Profit Maximization General Lot-sizing and Scheduling Problem (PGLSP). In Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management (pp. 230–240). Istanbul. Retrieved from http://ieomsociety.org/ieom2012/pdfs/64.pdf

Şimşit, Z. T., Günay, N. S., & Vayvay, Ö. (2014). Theory of Constraints: A Literature Review. Procedia - Social and Behavioral Sciences, 150, 930–936. https://doi.org/10.1016/j.sbspro.2014.09.104

Spector, Y. (2011). Theory of constraint methodology where the constraint is the business model. International Journal of Production Research, 49(11), 3387–3394. https://doi.org/10.1080/00207541003801283

SPENCER, M. S., & COX, J. F. (1995). Optimum production technology (OPT) and the theory of constraints (TOC): analysis and genealogy. International Journal of Production Research, 33(6), 1495–1504. https://doi.org/10.1080/00207549508930224

Trojanowska, J., & Dostatni, E. (2017). Application of the Theory of Constraints for Project Management. Management and Production Engineering Review, 8(3), 87–95. https://doi.org/10.1515/mper-2017-0031

Tsang, E., & Tsang, E. (1993a). Chapter 7 – Exploitation of problem-specific features. In Foundations of Constraint Satisfaction (pp. 189–251). https://doi.org/10.1016/B978-0-12-701610-8.50015-X

Tsang, E., & Tsang, E. (1993b). Chapter 9 – Solution synthesis. In Foundations of Constraint Satisfaction (pp. 271–298). https://doi.org/10.1016/B978-0-12-701610-8.50017-3

Umble, M., Umble, E., & Murakami, S. (2006). Implementing theory of constraints in a traditional Japanese manufacturing environment: The case of Hitachi Tool Engineering. International Journal of Production Research, 44(10), 1863–1880. https://doi.org/10.1080/00207540500381393

Utku, B. ., Cengiz, E., & Ersoy, A. (2011). Comparison of the theory of constraints with the traditional cost accounting methods in respect to product mix decisions. Doğuş Üniversitesi Dergisi, 12(2), 317–331. Retrieved from https://core.ac.uk/download/pdf/47254130.pdf

Wallace, M. (1994). Applying Constraints for Scheduling. In B. Mayoh et al. (eds.) (Ed.), Constraint Programming (pp. 153–171). Berlin: Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-85983-0_7