Organizational Competitive Advantage Analysis using SWOT Matrix and Hybrid Approach of Fuzzy-DEMATEL, ANP, and DEA
Subject Areas : Decision theoryAli Taherinezhad 1 , Alireza Alinezhad 2 , Saber Gholami 3 , Mahsa Abdolvand 4
1 - PhD Candidate, Department of Industrial Engineering, Qazvin branch, Islamic Azad University, Qazvin, Iran
2 - Associate Prof., Department of Industrial Engineering, Qazvin branch, Islamic Azad University, Qazvin, Iran
3 - MSc Graduate of Industrial Engineering, Caspian Higher Education Institute, Qazvin, Iran
4 - M.Sc., Department of Industrial Engineering, Faculty of Engineering, University of Qom, Qom, Iran.
Keywords: organizational competitive advantage, SWOT technique, fuzzy DEMATEL, analytic network process, data envelopment analysis.,
Abstract :
Today, due to the expansion of organizational competition, the growth of technology, and the increasing demand for customers, organizations that gain a competitive advantage over competitors by adopting scientific strategies can survive. There are various approaches to create a competitive advantage in organizations. On the other hand, in the scientific literature of this field, there is no integrated model that can cover the gap between these approaches. The aim of this paper is to present a new hybrid model for determining organizational competition strategies and criteria through decision-making tools. In this research, brands of dairy products listed in Iran were selected as a case study to demonstrate the application of the methodology. First, competitive strategies were determined through the Delphi method and expert judgment based on the SWOT technique. Then, relying on the SWOT technique, appropriate evaluation criteria were extracted through the fuzzy DEMATEL method. In the next step, each brand was considered as a decision-making unit (DMU). In addition, the output of the fuzzy DEMATEL method formed the initial values (inputs-outputs) of data envelopment analysis (DEA). Finally, after determining DEA weights via analytic network process (ANP), the efficiency of DMUs was measured by the Russell DEA model. The results of DEA showed that based on the strategies of the SWOT technique, 38% of the units under investigation are efficient. Also, the lowest efficiency obtained from the units was 82%, which shows that there is no noticeable dispersion in the efficiency values. In other words, it shows that the performance of all brands of dairy products is at a suitable level. The rest of the results and discussion are presented in detail. Analysis shows that the model of this research can be a suitable model for survival in today’s tight organizational competition in the world.
Adedeji, W. O., Odusoro, S. I., Adedeji, K. A., Rajan, J., Oke, S. A., Oyetunji, E. O., & Nwankiti, U. S. (2023). An Application of Data Envelopment Analysis in the Selection of the Best Response for the Drilling of Carbon Fiber-reinforced Plastic Composites. International Journal of Industrial Engineering and Engineering Management, 5(1), 1–14.
Alinezhad, A., & Khalili, J. (2019). EDAS method. New Methods and Applications in Multiple Attribute Decision Making (MADM), 149-155.
Alinezhad, A., & Taherinezhad, A. (2020). Control Chart Recognition Patterns Using Fuzzy Rule-Based System. Iranian Journal of Optimization, 12(2), 149-160.
Alinezhad, A., & Taherinezhad, A. (2021). Performance Evaluation of Production Chain using Two-Stage DEA Method (Case Study: Iranian Poultry Industry). new economy and trad, 16(3), 105-130.
Alinezhad, A., Heidaryan, L., & Taherinezhad, A. (2023). Ranking the Measurement System of Auto Parts Companies via MSA–MADM Combinatorial Method under Fuzzy Conditions. Sharif Journal of Industrial Engineering & Management, 38.1(2), 15-27.
Alinezhad, A., Makui, A., & Mavi, R. K. (2007). An inverse DEA model for inputs/outputs estimation with respect to decision maker’s preferences: The case of Refah bank of IRAN. Mathematical Sciences, 1(1-2), 61-70.
Amit, R., & Schoemaker, P. J. (1993). Strategic assets and organizational rent. Strategic management journal, 14(1), 33-46.
Ariyahya, M. B., Sholahuddin, M., & Mardalis, A. (2023). Business Model Canvas and SWOT Analysis in The Reconstruction of Competitive Strategy: A Case Study VCI Indonesia Company. Malaysian Management Journal (MMJ), 27, 161-182.
Banker, R. D., Charnes, A., & Cooper, W. W. (1984). Some models for estimating technical and scale inefficiencies in data envelopment analysis. Management science, 30(9), 1078-1092.
Brown Epstein, H. A. (2022). SWOT/TOWS/OTSW Analysis of recent past and near future. Journal of Hospital Librarianship, 22(4), 333-339.
Business Development Bank of Canada (BDC). (2023). https://www.bdc.ca/en/articles-tools/business-strategy-planning/define-strategy/swot-analysis-easy-tool-strategic-planning
Çağlar, M., & Nişel, S. (2024). Efficiency measurement of fintech companies: a two-stage DEA approach. Electronic Commerce Research, 1-32.
Charnes, A., Cooper, W. W., & Rhodes, E. (1978). Measuring the efficiency of decision making units. European journal of operational research, 2(6), 429-444.
Devi, W. S. G. R., Pringgandinie, D. R., Yulina, H., & Hadiansah, D. (2022). SWOT Analysis as a Competitive Strategy at Primkop Kartika Ardagusema Cimahi City, West Java, Indonesia. International Journal of Science, Technology & Management, 3(1), 134-143.
Esmaeili, M. (2012). An enhanced Russell measure in DEA with interval data. Applied Mathematics and Computation, 219(4), 1589-1593.
Fabrizio, C. M., Kaczam, F., de Moura, G. L., da Silva, L. S. C. V., da Silva, W. V., & da Veiga, C. P. (2022). Competitive advantage and dynamic capability in small and medium-sized enterprises: a systematic literature review and future research directions. Review of Managerial Science, 16(3), 617-648.
Görener, A. (2012). Comparing AHP and ANP: an application of strategic decisions making in a manufacturing company. International Journal of Business and Social Science, 3(11), 194-208.
Jain, V. (2018). Application of combined MADM methods as MOORA and PSI for ranking of FMS performance factors. Benchmarking: an international journal, 25(6), 1903-1920.
Khalili, J., & Alinezhad, A. (2018). Performance evaluation in green supply chain using BSC, DEA and data mining. International journal of supply and operations management, 5(2), 182-191.
Kiani Mavi, R., Makui, A., Fazli, S., & Alinezhad, A. (2010). A forecasting method in data envelopment analysis with group decision making. International Journal of Applied Management Science, 2(2), 152-168.
Leppänen, P., George, G., & Alexy, O. (2023). When do novel business models lead to high performance? A configurational approach to value drivers, competitive strategy, and firm environment. Academy of management journal, 66(1), 164-194.
Lin, C., Ting, S. F., Lee, L., & Lin, S. T. (2021). Firm capability assessment via the BSC and DEA. Industrial Management & Data Systems, 121(3), 567-593.
Loo, R. (2002). The Delphi method: a powerful tool for strategic management. Policing: An International Journal of Police Strategies & Management, 25(4), 762-769.
Mahirwe, A. M., & Wei, L. (2018). Investigation of competitive advantage of the dairy industry cluster: the case of Rwanda. American Journal of Industrial and Business Management, 8(05), 1358.
Oke, S. A., Okponyia, K. O., & Adeyemi, O. (2022). Applications of AHP, FAHP, BWM, Entropy, and CRITIC Methods in Electrohydraulic Forming Process Parametric Evaluation for Automotive Panels Using the 1100 Aluminum Alloy Sheets. International Journal of Industrial Engineering and Engineering Management, 4(2), 75–86.
Porter, M. E. (1985). Technology and competitive advantage. Journal of business strategy, 5(3), 60-78.
Saaty, T. L. (1996). Decision making with dependence and feedback: The analytic network process (Vol. 4922, No. 2). Pittsburgh: RWS publications.
Saeidi, P., Saeidi, S. P., Sofian, S., Saeidi, S. P., Nilashi, M., & Mardani, A. (2019). The impact of enterprise risk management on competitive advantage by moderating role of information technology. Computer standards & interfaces, 63, 67-82.
Sagheer, Z. T., & Al-Hilawy, A. H. O. (2023). Employing SWOT analysis in commercial banks to achieve a sustainable competitive advantage (A field study of the opinions of a sample of managers working in commercial banks in the Middle Euphrates region). JOURNAL OF ADMINISTRATION AND ECONOMICS, 12(46).
Saluja, R. S., & Singh, V. (2019). MADM-based approach for selection of welding process for aluminum tube manufacturing. In Advanced Engineering Optimization Through Intelligent Techniques: Select Proceedings of AEOTIT 2018 (pp. 441-450). Singapore: Springer Singapore.
Sanny, L., Simamora, B. H., Polla, J. R., & Atipa, J. L. (2018). Business Strategy Selection Using SWOT Analysis with ANP and Fuzzy TOPSIS for Improving Competitive Advantage. Pertanika Journal of Social Sciences & Humanities, 26(2).
Sarrafha, K., Kazemi, A., & Alinezhad, A. (2014). A multi-objective evolutionary approach for integrated production-distribution planning problem in a supply chain network. Journal of Optimization in Industrial Engineering, 7(14), 89-102.
Shabani, P., & Akbarpour Shirazi, M. (2024). Performance evaluation of commercial bank branches in dynamic competitive conditions: a network DEA model with serial and cross-shared resources. Journal of Economic Studies, 51(1), 1-23.
Shahanipour, S., Amindoust, A., Sahraian, K., & Beiranvand, S. (2020). Identification and prioritization of human resource strategies with employees’ creativity approach in administrative organizations using SWOT–ANP. Opsearch, 57(1), 119-143.
Shinde, P. A., Abbas, Q., Chodankar, N. R., Ariga, K., Abdelkareem, M. A., & Olabi, A. G. (2023). Strengths, weaknesses, opportunities, and threats (SWOT) analysis of supercapacitors: A review. Journal of Energy Chemistry, 79, 611-638.
Taherinezhad, A., & Alinezhad, A. (2022). COVID-19 Crisis Management: Global Appraisal using Two-Stage DEA and Ensemble Learning Algorithms. Scientia Iranica, (Articles in Press).
Taherinezhad, A., & Alinezhad, A. (2023). Nations performance evaluation during SARS-CoV-2 outbreak handling via data envelopment analysis and machine learning methods. International Journal of Systems Science: Operations & Logistics, 10(1), 2022243.
Taherinezhada, A., & Alinezhada, A. (2023). DEA-Based Evaluation of the Oil Prices Effect on Industry: A Case Study of the Stock Exchange. International Journal of Decision Intelligence, 1(3), 23-33.
Taherinezhad, A., Alinezhad, A., Gholami, S., & Abdolvand, M. (2023a). A Network Data Envelopment Analysis Approach for Efficiency Measurement of Poultry Industry Production Chains. International Journal of Decision Intelligence, 1(2), 1-12.
Taherinezhad, A., Alinezhad, A., & Gholami, S. (2023b). An Application of Data Envelopment Analysis and Game Theory for Appraisal of Balanced Scorecard Indexes in Media Industry. Journal of Industrial System Engineering and Management, 2(2), 47-59.
Tang, J., & Qin, F. (2022). Analyzing the impact of local government competition on green total factor productivity from the factor market distortion perspective: based on the three stage DEA model. Environment, Development and Sustainability, 24, 14298–14326.
Woudenberg, F. (1991). An evaluation of Delphi. Technological forecasting and social change, 40(2), 131-150.
Wu, W. W., & Lee, Y. T. (2007). Developing global managers’ competencies using the fuzzy DEMATEL method. Expert systems with applications, 32(2), 499-507.
Zadeh, L. A. (1983). Linguistic variables, approximate reasoning and dispositions. Medical Informatics, 8(3), 173-186.
Zhang, X., Chu, Z., Ren, L., & Xing, J. (2023). Open innovation and sustainable competitive advantage: The role of organizational learning. Technological Forecasting and Social Change, 186, 122114.
Zhao, Q., Tsai, P. H., & Wang, J. L. (2019). Improving financial service innovation strategies for enhancing china’s banking industry competitive advantage during the fintech revolution: A Hybrid MCDM model. Sustainability, 11(5), 1419.