Removal of thiocyanate ions from aqueous solutions using polypyrrole and polyaniline conducting electroactive polymers

Subject Areas : Journal of the Iranian Chemical Research

Reza  Ansari ¹ (Chemistry Department, University of Guilan, P.O. Box 41335-1914, Rasht, Iran)
Nilofar  Khoshbakht Fahim, ² (Chemistry Department, University of Guilan, P.O. Box 41335-1914, Rasht, Iran)
Ali  Fallah Dellavar ³ (Chemistry Department, University of Guilan, P.O. Box 41335-1914, Rasht, Iran)

Received: 2009-01-09 Accepted : 2009-08-24 Published : 2009-10-01

Keywords: Thiocyanate ion, Removal, Polypyrrole, Polyaniline, sawdust, Desorption,

Abstract :

Polypyrrole (PPy/Cl) and polyaniline (PAni/Cl) synthesized chemically onto sawdust (SD)was used for removal of thiocyanate (SCN-) ions from aqueous solutions. The effect of someimportant parameters such as pH, initial concentration, sorbent dosage, and contact time onuptake of SCN- was investigated. PPy/SD was found to be much more effective sorbent thanPAni/SD for uptake SCN- from aqueous solutions. Removal of SCN- ions using PPy/Cl issupposed to be occurred mostly via ion exchange process at the surface of polymer coated ontosawdust as a very thin film. Desorption studies were also carried out for figuring out thepossibility of the regeneration and reuse of the exhausted adsorbent. A proposed mechanismbased on interesting anion exchange properties of the PPy/Cl has been discussed. It was foundthat polypyrrole conducting polymers doped with releasable counterions can be used for used toremove some anions via ion exchange process under simple open circuit conditions. The findingin this paper shows the promising application of polypyrrole conducting polymers in future wateror wastewater purification technology.

References:

[1] Agency for Toxic Substances and Disease Registry (ATSDR) Toxicological profile for Cyanide,
Atlanta, GA: U.S. Department of Health and Human Services, Public Health Service, 2006.
[2] N.N. Greenwood, A. Earnshaw, Chemistry of the Elements, Butterworth-Heinemann, Second Ed.,
Oxford, 1997.
[3] R.G. Guy, Synthesis and Preparative Applications of Thiocyanates, John Wiley, New York, 1977.
[4] A. Kumar, R. Prasad, V.K. Gupta, Combin. Chem. High Throughput Screen, 7 (2004) 367- 374
[5] I. Vazquez, J. Rodríguez, E. Maranon, L. Castrillon, Y. Fernandez, J. Hazard. Mater. 137 (2006)
1773-1780
[6]G.V. Korshin, R.R. Nazmutdinov, A.R. Saifullin, Soviet Electrochem. 27 (1991) 1470-1478.
[7] H. Ding, S.M. Park, J. Electrochem. Soc. 150 (2003) E33-E38.
[8] T.A. Shotheim, R.L. Elsenbaumer, J.R. Reynolds, Handbook of Conducting Polymers, 2th edition,
Marcel Dekker, 1997.
[9] A.F. Diaz, J.C. Lacroix, New J. Chem. 12 (1988) 171-177.
[10] R. Ansari, Russian J. Electrochem. 41 (9) (2005) 1071-1078.
[11] L.X. Wang, X.G. Li, Y.L. Yang, React. Func. Polym. 47 (2001) 125-139
[12] A. Malinauskas, Polymer 42 (2001) 3957-3972
[13] R. Ansari, M.B. Keivani, E- J. Chemistry 3 (13) (2006) 202-217.
[14] R. Bodalia, R. Stern, C. Batich, J. Polym. Sci. Part A. Polym. Chem. 31 (1993) 2123-2127.
[15] L.H.C. Mattoso, N. Quimica, 19 (1996) 388-399.
[16] A. Kitani, J. Yano, K.J. Sasaki, J. Electroanal. Chem. 209 (1986) 227-232.
[17] R.J. Cushman, P.M. McManus, S.C. Yang, J. Electroanal. Chem. 219 (1986) 335-346.
[18] S. Machida, S. Miyata, Synth. Met. 31 (1989) 311-318.
[19] J. Tamm, J.A. Alumaa, A. Hallik, V. Sammelselg, J. Electroanal. Chem. 448 (1998) 25-31.
[20] R. Ansari, G.G. Wallace, W.E. Price, J. React. Func. Polym. 6 (2003) 141-146.
[21] R.S. Deinhammer, M.D. Porter, K. Shimazu, J. Electroanal. Chem. 387 (1995) 35-46.
[22] K.K. Shiu, F.Y. Song, K.W. Lau, J. Electroanal. Chem. 476 (1999) 109-117.
[23] T.W. Lewis, G.G. Wallace, M.R. Smyth, Analyst 124 (1999) 213-219.
[24] J. Petitjean, S. Aeiyach, J.C. Lacroix, P.C. Lacaze, J. Electroanal. Chem. 478 (1999) 92-100.
[25] G.G. Wallace, G.M. Spinks, L. Kane-Maguire, P. Teasdale, Conductivce Electroactive Polymers,
Intelligent Materials Systems, Second edition, by CRC Press LLC, Printed in the United States of
America, 2003.
[27] S.Y. Honga, S.M. Park, J. Electrochem. Soc. 150 (7) (2003) E360 - E365.
[28] C.A. Salzer, C.M. Elliott, S.M. Hendrickson, Anal. Chem. 71 (1999) 3677-3683.
[29] C. Weidlich, K.M. Mangold, K. Jütter, Synth. Met. 119 (2001) 263-264.
[30] T. Shimidzu, A. Ohtani, T. Iyoda, K. Honda, J. Electroanal. Chem. 224 (1987) 123-135.
[31] M.A. Vorotyntsev, E. Vieil, J. Heinze, Electrochim. Acta 41 (1996) 1913-1920.
[32] M.A. Vorotyntsev, E. Vieil, J. Heinze, J. Electroanal. Chem. 450 (1998) 121-141.
[33] C. Zhong, K. Doblhofer, G. Weinberg, Faraday Discuss. Chem. Soc. 88 (1989) 307-316.
[34] X. Ren, P.G. Pickup, J. Phys. Chem. 97 (1993) 5356-5362.
[35] R. Ansari, Asian J. Chem. 17 (3) (2005) 1449-1455.
[36] G. Inzelt, V. Kertesz, A.S. Nyback, J. Solid State Electrochem. 3 (1999) 251-257
R. Ansari et al. / J. Iran. Chem. Res. 2 (2009) 163-171
171
[37] M.M. Saleh, Desalination 235 (2009) 319-329.
[38] R. Ansari, N.K. Fahim, Reac. Func. Polym. 67 (2007) 367-374.
[39] R. Ansari, Acta Chim. Slovenica 53 (2006) 88-94.
[40] R. Ansari, A.R. Aliakbar, M. Masoudi, J. Polym. Mat. 80 (2005) 75-80.
[41] R. Ansari, N.K. Fahim, A.F. Delavar, Open Process Chem. J. 2 (2009) 1-5.
[42] R. Ansari, F. Raofie, E- J. Chem. 3 (10) (2006) 35-43.
[43] R. Ansari, A.F. Dellavar, J. Iran. Chem. Soc. 5 (2008) 657-668.
[44] F. Belaib, A.H. Meniai, M. Bencheikh-Lehocine, A. Mansri, M. Morcellet, M. Bacquet, B. Martel,
Desalination 166 (2004) 371-377.
[45] A. Parsa, S.H. Hosseini, M. Asefoddoleh, European J. Sci. Res. 26 (2009) 369-375.