Metallic Foams, New Generation of the Environmental Friendly Materials

Subject Areas : Journal of Environmental Friendly Materials

V. Abouei Mehrizi ¹ , B. Karbakhsh Ravari ²

1 - Advanced Materials Engineering Research Center, Islamic Azad University, Karaj, Branch
2 - Advanced Materials Engineering Research Center, Islamic Azad University, Karaj, Branch

Received: 2019-09-06 Accepted : 2019-11-22 Published : 2019-12-01

Keywords:

Abstract :

Metallic foams or Metfoams are a new class of advanced materials in environmental friendly materials group. These materials are the family of the cellular materials with low densities and novel physical, mechanical, thermal, electrical and acoustic properties. They are recyclable and nontoxic. They hold particular promise for market penetration in applications in which several of these features are exploited simultaneously. Recent technological advances in the field of metallic foams have led to the development of a wide range of processing techniques for the open, as well as closed cell morphologies. The processing route has to be decided on the basis of the cost of production, material properties, and the intended applications of the final product.

References:

[1] J. Weissmüller, R. N. Viswanath, D. Kramer, P. Zimmer, R. Würschum and H. Gleiter, Sci., 300, (2003), 312.

[2] C. Park and S. R. Nutts, Mater. Sci. Eng. A, 299, (2001), 68.

[3] T. Ikeda, T. Aoki and H. Nakajima, Met. Mat. Trans, 36A, (2005), 77.

[4] J. Banhart, D. Bellmaan and H. Clemens, Acta. Mate., 49, (2001), 3409.

[5] S. K. Hyun and H. Nakajima, Mat. Let., 57, (2003), 3149.

[6] B. Bauer, S. Kralj and M. Bušić, Tehnički vjesnik 20, 6, (2013), 1095.

[7] J. Banhart, J. Ind. Foundry, 51, (2005), 36.

[8] A. M. Hodeg and D. C. Dunand, Intermetallics, 9, (2001), 581.

[9] W. Deqing and S. Ziyuan, Mater. Sci. Eng. A, 361, (2003), 45.

[10] T. Wada and A. Inoue, Mater. Trans, 44, (2003), 2228.

[11] D. Weaire, Adv. Eng. Mater., 4, (2002), 723.

[12] S. K. Hyun and H. Nakajima, Mater. Sci. Tech., 74, (2004), 667.

[13] J. Banhart, N. A. Fleck and A. Mortensen, Cellular Metals: Manufacture, Properties, Applications, MITVerlag, Berlin, (2003).

[14] H. P. Degischer amd B. Kriszt, Handbook of Cellular Metals, Wiley VCH,Weinheim, (2002).

[15] D. K. Rajak, L. A. Kumaraswamidhas and S. Das, Mater. Sci. Technol., 32, (2016), 13, 1338.

[16] Y. An, S. Yang, E. Zhao and Z. Wang, Mater. Manuf. Processes, 33, 5, (2018), 528.

[17] J. Grabian, Arch. Foundry Eng., 11(1), (2011), 27.

[18] P. Malinowski, J. S. Suchy and J. Jakubski, Arch. Metall. Mater., 58(3), (2013), 965.

[19] K. Gawdzinska, Arch. Metall. Mater., 58(3), (2013), 659.

[20] I. Telejko, H. Adrian and B. Guzik, Arch. Metall. Mater., 58(1), (2013), 83.

[21] J. Szajnar, M. Cholewa, M. Stawarz, T. Wróbel, W. Sebzda, B.Grzesik and M. Stepien, Arch. Foundry Eng., 10(1), (2010), 175.

[22] M. Moradi, Open Access Dissertations, (2011), 481.

[23] Y. Du, A. B. Li, X. X. Zhang, Z. B. Tan, R. Z. Su F. Pu and L. Geng, Mater. Lett., 148, (2015), 79.

[24] S. Sowmiy, P. Nallanukalab, J. Anburaj and B. Simhachalam, Mat. Today, 5 9, 3, (2018), 2036.

[25] J. Jayaraj, B. J. Park, D. H. Kim, W.T. Kim and E. Fleury, Scripta Mater., (2006), 55, 1063.

[26] M. Kolluri, M. Mukherjee, F. García-Moreno, J. Banhart and U. Ramamurty, Acta Mater., (2008), 56, 1114.

[27] L. Zhibin, X. Chen, B. Jiang and F. Lu, Compos. Struct., 145, (2016), 142.

[28] T. Fujita, L. Qian, K. Inoke and M. Chen, in the proceedings of the 16th Int.Microscopy Congress, Sapporo, Japan, 3-8 , (2006), 1864.

[29] K. Gawdzinska and M. Gucma, Arch. Metall. Mater. , (2015), 60, 1.

[30] M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley, Metal Foams: A Design Guide, Butterworth-Heinemann, Woburn, MA, (2000).

[31] V. C. Srivastava and K. L. Sahoo, Mater. Sci. -Poland, Vol. 25, No. 3, (2007).

[32] J. Lázaro, E. Solórzano, M. A. Rodríguez Pérez and F. García-Moreno, J. Mater. Sci., 50, 8, (2015), 3149.

[33] C. Girolamo, G. Dodbiba and M. Elisa Tata Procedia Structural Integrity, 2, (2016), 2277.

[34] A. H. Brothers and D. C. Dunand, Mat. Sci. Eng., A,489, (2008), 439.

[35] M. Mahadev, C. G. Sreenivasa and K. M. Shivakumar, IOP Conf. Series: Mater. Sci. Eng., 376, (2018).

[36] A. S. Antenucci, V. Guarino, V. Tagliaferri and N. Ucciardello. Mater. Des., 59, (2014), 124.

[37] Advanced Materials, Metal Foam Market Size & Analysis, Global Industry Report, 2014-2025, Market Research Report, Oct, (2017). 

[38] Global Aluminum Foam Market Insights Report, (2019), September.

[39] Al Foam Market: Global Industry Analysis 2013 - 2017 and Opportunity Assessment; 2018 – 2028, Future Marketing Insight, November (2019), REP-GB-8402

[40] Metallic Foam Market: Future Growth and Challenges Analyzed, Market Report, August, (2019).