Passivity-Based Control of the DC-DC Buck Converters in High-Power Applications
Subject Areas : journal of Artificial Intelligence in Electrical Engineering
Keywords: uncertainty, Voltage control, nonlinear control systems, Lyapunov method, DC-DC power converters,
Abstract :
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to passivity based controller which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with load value and hence, in this paper all of the converted parasitic elements are modeled during development of the controller. In order to evaluate the accuracy and effectiveness of the proposed method, designed controller is simulated using MATLAB/Simulink toolbox. Presented simulation result proves that the developed controller has acceptable dynamic and steady-state responses which are compared with a standard PI controller in high-power applications.
[1] Salimi, M.; Soltani, J.; Mrkadeh, G.A.; Abjadi,
N.R., "Indirect output voltage regulation of DCDC
buck/boost converter operating in
continuous and discontinuous conduction modes
using adaptive backstepping approach," Power
Electronics, IET , vol.6, no.4, pp.732,741, April
2013
[2] Kumar, K.R.; Jeevananthan, S., "Design of
Sliding Mode Control for Negative Output
Elementary Super Lift Luo Converter operated
in Continuous Conduction
Mode," Communication Control and Computing
Technologies (ICCCCT), 2010 IEEE
International Conference on , vol., no.,
pp.138,148, 7-9 Oct. 2010
[3] Wang, T.G.; Xunwei Zhou; Lee, F.C., "A low
voltage high efficiency and high power density
DC/DC converter," Power Electronics
Specialists Conference, 1997. PESC '97
Record., 28th Annual IEEE , vol.1, no.,
pp.240,245 vol.1, 22-27 Jun 1997
[4] Hwu, K. I.; Tau, Y. T., "A Forward Converter
Having an FPGA-based PID Controller with
Parameters On-ine Tuned," Power Electronics
and Drives Systems, 2005. PEDS 2005.
International Conference on , vol.2, no.,
pp.1239,1243, 28-01 Nov. 2005
[5] Sumita Dhali, P.Nageshwara Rao,Praveen
Mande and K.Venkateswara Rao, "PWM-Based
Sliding Mode Controller for DC-DC Boost
Converter,” International Journal of Engineering Research and Applications (IJERA) Vol. 2, Issue 1, pp.618-623, Jan-Feb 2012
[6] Salimi, M.; Soltani, J.; Markadeh, G.A., "A novel method on adaptive backstepping control of buck choppers," Power Electronics, Drive Systems and Technologies Conference (PEDSTC), 2011 2nd , vol., no., pp.562,567, 16-17 Feb. 2011
[7] Kurokawa, F.; Maeda, Y.; Shibata, Y.; Maruta, H.; Takahash, T.; Bansho, K.; Tanaka, T.; Hirose, K., "A novel digital PID controlled dc-dc converter," Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010 International Symposium on , vol., no., pp.50,53, 14-16 June 2010
[8] Salimi, M.; Soltani, J.; Zakipour, A.; Hajbani, V., "Sliding mode control of the DC-DC flyback converter with zero steady-state error," Power Electronics, Drive Systems and Technologies Conference (PEDSTC), 2013 4th , vol., no., pp.158,163, 13-14 Feb. 2013
[9] Zengshi Chen, "PI and Sliding Mode Control of a Cuk Converter," Power Electronics, IEEE Transactions on , vol.27, no.8, pp.3695,3703, Aug. 2012
[10] Adel Zakipour, Mahdi Salimi, "On backstepping controller Design in buck/boost DC-DC Converter," International Conference on Electrical, Electronics and Civil Engineering (ICEECE'2011) Pattaya Dec, 2011
[11] Salimi, M.; Soltani, J.; Zakipour, A., "Adaptive nonlinear control of DC-DC buck/boost converters with parasitic elements consideration," Control, Instrumentation and Automation (ICCIA), 2011 2nd International Conference on , vol., no., pp.304,309, 27-29 Dec. 2011
[12] Sira-Ra re , H rtega, R , assivit -based controllers for the stabilization of DC-to-DC power converters," Decision and Control, 1995., Proceedings of the 34th IEEE Conference on , vol.4, no., pp.3471,3476 vol.4, 13-15 Dec 1995
[13] Hebert t Sira- Ramirez, Romeo Ortega, Mauricio Garfia-Esteban and Eafael Perez-Moreno, "Passivity Based regulation of a class of multivariable DC to DCpower converter,"
13th Triennial Woerld congress sanfancisco USA, IFAC, 1996
[14] Angulo-Nunez, M.I.; Sira-Ramirez, H., "Flatness in the passivity based control of DC-to-DC power converters," Decision and Control, 1998. Proceedings of the 37th IEEE Conference on , vol.4, no., pp.4115,4120 vol.4, 16-18 Dec 1998
[15] Zhaohua Yang; Leitao Wu, "A new passivity-based control method and simulation for DC/DC converter," Intelligent Control and Automation, 2004. WCICA 2004. Fifth World Congress on , vol.6, no., pp.5582,5585 Vol.6, 15-19 June 2004
[16] Kwasinski, A.; Krein, P.T., "Passivity-Based Control of Buck Converters with Constant-Power Loads," Power Electronics Specialists Conference, 2007. PESC 2007. IEEE , vol., no., pp.259,265, 17-21 June 2007
[17] Wang Bingyuan; Feng Hui, "The Buck-Boost converter adopting passivity-based adaptive control strategy and its application," Power Electronics and Motion Control Conference (IPEMC), 2012 7th International , vol.3, no., pp.1877,1882, 2-5 June 2012
[18] Mahdi Salimi, Jafar Soltani, Gholamreza Arab Markadeh and Navid Reza Abjadi, "Adaptive nonlinear control of the DC-DC buck converters operating in CCM and DCM," EUROPEAN TRANSACTIONS ON ELECTRICAL POWER Euro. Trans. Electr. Power Published online in Wiley Online Library, (2012)
[19] Bingyuan Wang; Yuling Ma, "Research on the passivity-based control strategy of Buck-Boost converters with a wide input power supply range," Power Electronics for Distributed Generation Systems (PEDG), 2010 2nd IEEE International Symposium on , vol., no., pp.304,308, 16-18 June 2010
[20] Young-Ik Son; In-Hyuk Kim, "Complementary PID Controller to Passivity-Based Nonlinear Control of Boost Converters With Inductor Resistance," Control Systems Technology, IEEE Transactions on , vol.20, no.3, pp.826,834, May 2012
[21] Gavini, L.; Izadian, A., "Feed-forward excess passivity-based control of buck-boost
converters," IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society , vol., no., pp.2289,2294, 25-28 Oct. 2012