سنتز و کاربرد چارچوب فلز-آلی مغناطیسی عامل دارشده با پلی‌ایندول برای استخراج و اندازه گیری ترکیب های فنلی در نمونه های زیست‌محیطی
محورهای موضوعی : شیمی معدنی
محبوبه منوچهری
1
,
صبرعلی نوری
2
1 - دانشیار شیمی معدنی گروه شیمی، واحد تهران‌مرکز، دانشگاه آزاد اسلامی، تهران، ایران.
2 - دانشجوی دکترای شیمی کاربردی گروه شیمی، واحد تهران‌مرکز، دانشگاه آزاد اسلامی، تهران، ایران.
کلید واژه: چارچوب فلز-آلی, نانوجاذب مغناطیسی, پلی ایندول, پیش تغلیظ, نیتروفنول ها,
چکیده مقاله :
در این پژوهش، نانوجاذبی جدید بر پایه چارچوب فلز-آلی مغناطیسی پوشش داده‌شده با پلی‌ایندول سنتز و برای استخراج، پیشتغلیظ و تعیین مقادیر ناچیز نیتروفنلها در نمونههای آب، بهکار برده شد. جاذب سنتزشده با روشهای پراش پرتو ایکس (XRD)، طیف‌سنجی فروسرخ تبدیل فوریه (FTIR)، مغناطیس‌سنجی نمونه ارتعاشی (VSM)، میکروسکوپی الکترونی روبشی (SEM) و میکروسکوپی الکترونی عبوری (TEM) شناسایی شد. تصاویر SEMو TEM نانوساختاربودن جاذب را تایید کردند. الگوی XRD ساختار جاذب را بررسی کرد. نتیجههای VSM نشان دادند که نانوجاذب سنتزشده ویژگی ابرپارامغناطیسی دارد. روش طراحی مختلط مرکزی (CCD) برای شناسایی و بهینهسازی عاملهای موثر بر پیشتغلیظ به‌کارگرفته شد. پس از جذب و شویش، نیتروفنلها با دستگاه سوانگاری مایع با کارایی بالا مجهز به آشکارساز فرابنفش اندازهگیری شدند. pH محلول نمونه، زمان جذب، مقدار جاذب و حجم نمونه در شرایط بهینه بهترتیب برابر با 5/9، 7/3 دقیقه، 5/27 میلیگرم، و 75 میلیلیتر بودند. همچنین در این شرایط، استخراج بدون افزودن نمک به محلول نمونه، زمان واجذب برابر با 3 دقیقه و 200 میکرولیتر کلریدریک اسید 01/0 مولار در استونیتریل بهعنوان حلال شویش، انجام شد. تحت شرایط بهینه حد تشخیصها و گستره خطی منحنی واسنجی بهترتیب در گستره 15/0 تا 25/0 و 300/0 تا 00/5 میکروگرم بر لیتر بهدست آمد. انحراف استاندارد نسبی روش بهعنوان معیاری از دقت در گستره 5/4 تا 4/6 درصد بهدست آمد.
In this research, a new nanoabsorbent was synthesized based on a metal-organic magnetic framework coated with polyindole. This nanoabsorbent was then used for the extraction, pre-concentration, and determination of small amounts of nitrophenols in water samples. First, the synthesized adsorbent was identified using various methods including x-ray diffraction (XRD), Fourie transform infrared spectroscopy (FTIR), Vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The SEM and TEM images confirmed the nanostructure of the adsorbent, while the XRD pattern checked and confirmed its phase structure. Additionally, the VSM results showed that the synthesized nanoabsorbent has superparamagnetic properties. Finally, all of these methods confirmed the successful synthesis of the nanoabsorbent. The central composite design (CCD) method was employed to identify and optimize the parameters that affect pre-concentration. After adsorption and washing, nitrophenols were measured using a high-performance liquid chromatography device equipped with an ultraviolet detector. The optimal extraction conditions were as follows: pH of the sample solution, 9.5; absorption time, 3.7 minutes; amount of absorbent, 27.5 mg; sample volume, 75 ml; washing solvent, 200 μl of 0.01 M hydrochloric acid in acetonitrile; desorption time, 3 minutes without adding salt to the sample solution. Under these optimal conditions, the limit of detection and the linear range of the calibration curve were obtained in the range of 0.15-0.25 and 5.0-300 µg/liter, respectively. The relative standard deviation of the method, as a measure of accuracy, was obtained in the range of 4.5-4.6%. Finally, the desired adsorbent was used for rapid extraction and pre-concentration of nitrophenols in water samples
[1] Fritz JS. Analytical solid-phase extraction. New York: John Wiley & Sons; 1999.
[2] Lee HB, Peart TE. Supercritical carbon dioxide extraction of resin and fatty acids from sediments at pulp mill sites. Journal of Chromatography A. 1992;594(1-2):309-15. doi :org/10.1016/0021-9673(92)80344-T
[3] Thurman EM, Mills MS. Solid-phase extraction: Principles and practice. New York: Wiley; 1998.
[4] Lambropoulou DA, Albanis TA. Liquid-phase micro-extraction techniques in pesticide residue analysis. J Biochem Biophys Methods. 2007;70(2):195-228. doi: org/10.1016/j.jbbm.2006.10.004
[5] Dimou AD, Sakkas VA, Albanis TA. Photodegradation of trifluralin in natural waters and soils: degradation kinetics and influence of organic matter. International Journal of Environmental Analytical Chemistry. 2004;84(1-3):173-82. doi: org/10.1080/0306731031000149660
[6] Tong C, Guo Y, Liu W. Simultaneous determination of five nitroaniline and dinitroaniline isomers in wastewaters by solid-phase extraction and high-performance liquid chromatography with ultraviolet detection. Chemosphere. 2010;81(3):430-5. doi: org/10.1016/j.chemosphere.2010.06.066
[7] Mohseni SF, Manoochehri M, Taromi FA. A novel poly(2-mercaptobenzothiazole) coated magnetic nanoadsorbent derived from ZIF-8 for preconcentration/determination of palladium and silver. RSC advances. 2022;12(55):35849-59.
[8] Rezabeyk S, Manoochehri M. Selective extraction and determination of beryllium in real samples using amino-5,8-dihydroxy-1,4-naphthoquinone functionalized magnetic MIL-53 as a novel nanoadsorbent. RSC Advances. 2020;10(60):36897-905. doi: org/10.1039/D0RA05408A
[9] Asgharinezhad AA, Esmaeilpour M, Siavoshani AY. Extraction and preconcentration of Ni (ii), Pb (ii), and Cd (ii) ions using a nanocomposite of the type Fe3O4@SiO2@polypyrrole-polyaniline. RSC Advances. 2022;12(30):19108-14. doi: org/10.1039/d2ra03077b
[10] Tarighat MA, Rezaei A, Abdi G. Efficient catalytic extraction of metal ions in some Persian Gulf algae samples using Fe3O4@SiO2-(3-chloropropyl)trimethoxysilane-l-cysteine nanocomposite and clustering of water samples according to alga metal pollution. Applied Nanoscience. 2023;14(1):89-107. doi: org/10.1007/s13204-023-02949-5
[11] Heydari N, Ghorbani-Kalhor E, Asgharinezhad AA, Bahram M, Vardini MT. Determination of phthalate esters in real matrixes after extraction with a novel magnetic nano-material derived from a metal–organic framework. Microchemical Journal. 2023;191:108704. doi: org/10.1016/j.microc.2023.108704
[12] Asgharinezhad AA, Ebrahimzadeh H. A novel polymer coated magnetic porous carbon nanocomposite derived from a metal-organic framework for multi-target environmental pollutants preconcentration. Journal of Chromatography A. 2020;1634:461664. doi: org/10.1016/j.chroma.2020.461664
[13] Asgharinezhad AA, Ebrahimzadeh H. Magnetic porous carbon nanocomposite derived from cobalt based-metal-organic framework for extraction and determination of homo and hetero-polycyclic aromatic hydrocarbons. Talanta. 2021;233:122526. doi: org/10.1016/j.talanta.2021.122526
[14] Jalilian N, Ebrahimzadeh H, Asgharinezhad AA. A nanosized magnetic metal-organic framework of type MIL-53 (Fe) as an efficient sorbent for coextraction of phenols and anilines prior to their quantitation by HPLC. Microchimica Acta. 2019;186:1-8. doi: org/10.1007/s00604-019-3698-9
[15] Jalilian N, Ebrahimzadeh H, Asgharinezhad AA. Preparation of magnetite/multiwalled carbon nanotubes/metal-organic framework composite for dispersive magnetic micro solid phase extraction of parabens and phthalate esters from water samples and various types of cream for their determination with liquid chromatography. Journal of Chromatography A. 2019;1608:460426. doi: org/10.1016/j.chroma.2019.460426
[16] Heydari N, Ghorbani-Kalhor E, Asgharinezhad A, Bahram M, Vardini MT. Application of magnetic porous carbon nanosorbent derived from the pyrolysis of magnetic r-MIL-88 for the extraction and determination of polycyclic aromatic hydrocarbons in environmental samples. Iranian Chemical Engineering Journal. 2024;23(132):132-148. [In Persian] doi: 10.22034/IJCHE.2023.378709.1270
[17] Asgharinezhad AA, Mollazadeh N, Ebrahimzadeh H, Mirbabaei F, Shekari N. Magnetic nanoparticles based dispersive micro-solid-phase extraction as a novel technique for coextraction of acidic and basic drugs from biological fluids and waste water. Journal of Chromatography A. 2014;1338:1-8. doi: org/10.1016/j.chroma.2014.02.027
[18] Sadeghi S, Aboobakri E. Magnetic nanoparticles with an imprinted polymer coating for the selective extraction of uranyl ions. Microchimica Acta. 2012;178:89-97. doi.org/10.1007/s00604-012-0800-y
[19] Abolhasani J, Khanmiri RH, Ghorbani-Kalhor E, Hassanpour A, Asgharinezhad AA, Shekari N, Fathi A. An Fe3O4@SiO2@polypyrrole magnetic nanocomposite for the extraction and preconcentration of Cd (ii) and Ni (ii). Analytical Methods. 2015;7(1):313-20. doi:org/10.1039/C4AY01991A
[20] Saleh M, Chandra V, Kemp KC, Kim KS. Synthesis of N-doped microporous carbon via chemical activation of polyindole-modified graphene oxide sheets for selective carbon dioxide adsorption. Nanotechnology. 2013;24(25):255702. doi: 10.1088/0957-4484/24/25/255702
[21] Mousavi SH, Manoochehri M, Taromi FA. Fabrication of a novel magnetic metal–organic framework functionalized with 2-aminothiophenol for preconcentration of trace silver amounts in water and wastewater. RSC Advances. 2021;11(23):13867–75. doi: org/10.1039/D1RA00420D
[22] Mehraban M, Manoochehri M. Determination of chlorophenols in water by liquid chromatography method after magnetic solid phase extraction based on SiO2/MIL‐101@Fe3O4 nanoadsorbent. Separation Science Plus. 2020;3(5):150–7. doi: org/10.1002/sscp.201900076
[23] Asgharinezhad AA, Karami S, Ebrahimzadeh H, Shekari N, Jalilian N. Polypyrrole/magnetic nanoparticles composite as an efficient sorbent for dispersive micro-solid-phase extraction of antidepressant drugs from biological fluids. International Journal of Pharmaceutics. 2015;494(1):102–12. doi: org/10.1016/j.ijpharm.2015.08.001