Removal of Anionic Brown 14 and Cationic Blue 41 dyes via Fenton Process

Subject Areas : Polymer

Elham Keshmirizadeh ¹ ()
Shahnaz Eshaghi ² ()

Received: 2015-11-11 Accepted : 2015-11-11 Published : 2015-01-01

Keywords:

Abstract :

Textile wastewater contains a number of dyes which are known to be toxic and carcinogenic. In this study the results show that the Fenton (Fe2+/H2O2) process is an efficient method for the removal of Acid Brown 14 (A.BR14) and Cationic Blue 41 (C.B41) dyes from textile wastewater. In this method, two reagents Fe2+and H2O2are used and do not require any additional energy. Several experiments showed that the pH level was an important parameter for this method. Fe2+concentration was also an important factor in the experiment. The UV- Visible spectrophotometer analysis was used for verifying the results. Some of the important parameters were as follows. Initial dye concentration range: 50-500 mg/L, initial volume range: 50-500mL, initial pH: 3-5, concentration of Fe2+as a catalyst: 4-18 mg/L, dose of H2O2as an oxidant: 1.13, 2.26, 3.39g/L, and limitation time: 3-18 minutes. An efficiency of greaterthan 99% was observed for both dyes.