Separation and Recovery of Platinum by Magnetic Coreshell Nanostructures Modified with N-(2-aminoethyl)-3- aminopropyltrimethoxysilane

Subject Areas : Polymer

Mansoor Anbia ¹ , Ruholla Mehrizi ²

1 -
2 -

Received: 2016-07-22 Accepted : 2016-07-22 Published : 2016-05-01

Keywords:

Abstract :

In this paper, Fe3 O4 @SiO2 core/shell magnetic nanostructure has been synthesized and modified by N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPTMS). Fe3 O4 @SiO2 was used as a novel adsorbent for separation of hexachloroplatinic acid. X-ray diffraction (XRD), scanning electron microscopy (SEM), and FT-IR technique were used to characterize morphologies and surface texturing of these adsorbents. The effective factors on adsorption, such as pH, contact time; salt effect and temperature were studied systematically. The optimal conditions of Platinum adsorption were obtained at temperature of about 25o C, pH about 2.5 and the equilibrium time of 30-40 minutes. The maximum adsorption capacity (qmax) in the optimal conditions was equal to 74 mg/g. The magnetic separation of the absorbent was achieved by a magnet and finally the absorbent was compared with other absorbents. Inductive coupled plasma optical emission spectrometer (ICP-OES) was used for determination of metal ion concentrations in the aqueous solution.