Preparation and molecular weight determination of soya-beans and benniseed oil-modified alkyd resins
محورهای موضوعی : Journal of the Iranian Chemical Research
Adeniyi S. Ogunlaja
1
(Bells University of Technology, Department of Chemical Sciences, Ota, PMB 1015, Ogun state, Nigeria)
Olufunmilayo Abiona
2
(Bells University of Technology, Department of Chemical Sciences, Ota, PMB 1015, Ogun state, Nigeria)
کلید واژه: Soybean oil, Benni-seed oil, Alkyd, Resin,
چکیده مقاله :
Alkyd resins were prepared into four different sets by varying the percentage concentrationof the glycerol content. Various properties such as the viscosity, Surface drying time, solubilityand color of the alkyd resins were evaluated for the various sets. The alkyd resin with the highestglycerol content was the most viscous, brownish in color and having the highest molecularweight this is due to the ratio 1:3 oil to glycerol content.
[1] Kirk-Othmer, In: Encyclopedia of Chemical Technology,vol. 1, second ed. Interscience Publishers,
New York, 1963.
[2] S. Tadmor and C.G. Gogos, Principles of polymer Processing. A wiley- Interscience Publication,
1979.
[3] F.D. Gunstone, Fatty Acid and Lipid Chemistry. Chapman and Hall, London, 1996.
[4] K.D. Weiss, Progress Polym. Sci. 22 (1997) 203–245.
[5] U. Usta, Biomass and Bioenergy 28 (2005) 77–86.
[6] D.S. Ogunniyi, T.E. Odetoye, Bioresource Technology 99 (2008) 1300–1304.
[7] ASTM, Designation: D4052-91. Annual Book of ASTM Standards, vol. 05.02. ASTM, Philadelphia,
PA, (1995a) 684–687.
[8] AOAC, Section A: Commercial Fats and Oils. American Oil Chemists Society (AOCS) Official
Method CD1-25 for Iodine Value. Assoc. Off. Anal. Chem., Washington, 1993.
[9] AOAC, Commercial Fats and Oils. American Oil Chemists Society (AOCS) Official Method CD3-25
for Saponification Value. Assoc. Off. Anal. Chem.,Washington, 1997.
[10] D. Pearson, The chemical Analysis of Foods, Churchhill Living Stone, 7th Edition, 1976.
[11] D. Stoye, Alkyd Resins,Resins for Coatings: Chemistry, Properties and Applications. Carl Hanser
Verlag, Munich, 1996.
[12] C.O. Akintayo, K.O. Adebowale, Progress in Organic Coatings, 50 (2004)138–143.
[13] E. Bekele, Seminararbeit im Rahmen der Vorlesung O¨ lpflanez-Zu¨chtung, Anbau, 2000.
[14] P.N. Giannelos, F. Zannikos, S. Stournas, E. Lois, G. Anastopoulos, Industrial Crops and
Products 16 (2002) 1–9.
[15] P.J. Flory, Principles of Polymer Chemistry; Cornell University Press, New York, 1953.
[16] L.I. Hosier, S. Alun Vaughan, R. Geoffrey Mitchell, Jintana Siripitayananon, J. Fred Davis, Practical
Approach in polymer Chemistry: Polymer Chemistry, Oxford University Press,1st ed, 2004.
[17] W. Wang, S. Bo, S. Li, W. Qin, Int. J. Biol. Macromol. 13 (1991) 281-285.
[18] A.I. Gamzazade, V.M. Shaishk, A.M. Sklyer, E.V. Stikova, S.A. Pavlova, S.V. Rogozhin, Acta
Polym. 36 (1985) 420-426.
[19] S.H. Maron, J.B. Lando, Fundamentals of Physical Chemistry, Macmillan, 1974.
