On the Magneto-Thermo-Elastic Behavior of a Functionally Graded Cylindrical Shell with Pyroelectric Layers Featuring Interlaminar Bonding Imperfections Rested in an Elastic Foundation
Subject Areas : EngineeringM Saadatfar 1 , M Aghaie-Khafri 2
1 - Faculty of Mechanical Engineering, K.N. Toosi University of Technology
2 - Faculty of Mechanical Engineering, K.N. Toosi University of Technology
Keywords: magnetic field, Elastic foundation, Pyroelectric, Imperfect bonding, Exponentially graded cylindrical shell,
Abstract :
The behavior of an exponentially graded hybrid cylindrical shell subjected to an axisymmetric thermo-electro-mechanical loading placed in a constant magnetic field is investigated. The hybrid shell is consisted of a functionally graded host layer embedded with pyroelectric layers as sensor and/or actuator that can be imperfectly bonded to the inner and the outer surfaces of a shell. The shell is simply supported and could be rested on an elastic foundation. The material properties of the host layer are assumed to be exponentially graded in the radial direction. To solve governing differential equations, the Fourier series expansion method along the longitudinal direction and the differential quadrature method (DQM) across the thickness direction are used. Numerical examples are presented to discuss effective parameters influence on the response of the hybrid shell.
[1] Ghorbanpour Arani A., Amir S., 2011, Magneto-thermo-elastic stresses and perturbation of magnetic field vector in a thin functionally graded rotating disk, Journal of Solid Mechanics 3 (4): 392-407.
[2] Ghorbanpour Arani A., Golabi S., Saadatfar M., 2006, Stress and electric potential fields in piezoelectric smart spheres, Journal of Mechanical Science and Technology 20: 1920-1933.
[3] Saadatfar M., Razavi S.A., 2009, Piezoelectric hollow cylinder with thermal gradient, Journal of Mechanical Science and Technology 23: 47-55.
[4] Saadatfar M., Rastgoo A., 2008, Stress in piezoelectric hollow sphere with thermal gradient, Journal of Mechanical Science and Technology 22: 1460-1467.
[5] Shariyat M., 2009, Dynamic buckling of imperfect laminated plates with piezoelectric sensors and actuators subjected to thermo-electro-mechanical loadings, considering the temperature-dependency of the material properties, Composite Structures 88 (2): 228-239.
[6] Shariyat M., 2008, Dynamic buckling of suddenly loaded imperfect hybrid FGM cylindrical shells with temperature-dependent material properties under thermo-electro-mechanical loads, International Journal of Mechanical Sciences 50 (12): 1561-1571.
[7] Shariyat M., 2009, Vibration and dynamic buckling control of imperfect hybrid FGM plates with temperature-dependent material properties subjected to thermo-electro-mechanical loading conditions, Composite Structures 88 (2): 240-252.
[8] Ebrahimi F., Rastgoo A., 2009, Temperature effects on nonlinear vibration of FGM plates coupled with piezoelectric actuators, Journal of Solid Mechanics 1 (4): 260-364.
[9] Rastgo ghamsari A., Ebrahimi F., 2008, Free vibration analysis of smart annular FGM plates integrated with piezoelectric layers, Smart Materials and Structures 17: 015044.
[10] Ebrahimi F., Rastgo ghamsari A., 2008, FSDPT based study for vibration analysis of piezoelectric coupled annular FGM plate, Journal of Mechanical Science and Technology 23: 2157-2168.
[11] Jabbari M., Farzaneh Joubaneh E., Khorshidvand A.R., Eslami M.R., 2013, Buckling analysis of porous circular plate with piezoelectric actuator layers under uniform radial compression, International Journal of Mechanical Sciences 70: 50-56.
[12] Khorshidvand A.R., Jabbari M., Eslami M.R., 2012, Thermoelastic buckling analysis of functionally graded circular plates integrated with piezoelectric layers, Journal of Thermal Stresses 35: 695-717.
[13] Khorshidvand A.R., Farzaneh Joubaneh E., Jabbari M., Eslami M.R., 2014, Buckling analysis of a porous circular plate with piezoelectric sensor–actuator layers under uniform radial compression, Acta Mechanica 225: 179-193.
[14] Saadatfar M., Aghaie-Khafri M., 2014, Hygrothermosmagnetoelectroelastic analysis of a functionally graded magnetoelectroelastic hollow sphere resting on an elastic foundation, Smart Materials and Structures 23: 035004.
[15] Alibeigloo A., Nouri V., 2010, Static analysis of functionally graded cylindrical shell with piezoelectric layers using differential quadrature method, Composite Structures 92: 1775-1785.
[16] Alibeigloo A., Kani A.M., Pashaei M.H., 2012, Elasticity solution for the free vibration analysis of functionally graded cylindrical shell bonded to thin piezoelectric layers, International Journal of Pressure Vessels and Piping 89: 98-111.
[17] Alibeigloo A., 2011, Thermoelastic solution for static deformations of functionally graded cylindrical shell bonded to thin piezoelectric layers, Composite Structures 93: 961-972.
[18] Alibeigloo A., 2011, Exact solution of an FGM cylindrical panel integrated with sensor and actuator layers under thermomechanical load, Smart Materials and Structures 20: 035002.
[19] Akbari Alashti R., Khorsand M., 2011, Three-dimensional thermo-elastic analysis of a functionally graded cylindrical shell with piezoelectric layers by differential quadrature method, International Journal of Pressure Vessels and Piping 88: 167-80.
[20] Akbari Alashti R., Khorsand M., 2012, Three-dimensional dynamo-thermo-elastic analysis of a functionally graded cylindrical shell with piezoelectric layers by DQ-FD coupled, International Journal of Pressure Vessels and Piping 96: 49-67.
[21] Ghorbanpour Arani A.G., Salari M., Khademizadeh H., Arefmanesh A., 2009, Magnetothermoelastic transient response of a functionally graded thick hollow sphere subjected to magnetic and thermoelastic fields, Archive of Applied Mechanics 79 (6-7): 481-497.
[22] Ghorbanpour Arani A., Bakhtiari R., Mohammadimehr R., Mozdianfard M.R., 2001, Electro-magneto-mechanical responses of a radially polarized rotating functionally graded piezoelectric shaft, Turkish Journal of Engineering and Environmental Sciences 36 (1): 33-44.
[23] Ghorbanpour Arani A., Kolahchi R., Mosallaie Barzoki A.A., 2011, Effect of material in-homogeneity on electro-thermo-mechanical behaviors of functionally graded piezoelectric rotating shaft, Applied Mathematical Modelling 35 (6): 2771-2789.
[24] Kong T., Li D.X., Wang X., 2009, Thermo-magneto-dynamic stresses and perturbation of magnetic field vector in a non-homogeneous hollow cylinder, Applied Mathematical Modelling 33: 2939-2950.
[25] Khalili S.M.R., Mohazzab A.H., Jabbari M., 2009, Analysis on centrifugal load effect in FG hollow sphere subjected to magnetic field, Journal of Solid Mechanics 1: 300-312.
[26] Dai H.L., Hong L., Fu Y.M., Xiao X., 2010, Analytical solution for electro-magneto-thermo-elastic behaviors of a functionally graded piezoelectric hollow cylinder, Applied Mathematical Modelling 34: 343-357.
[27] Shariyat M., Asemi K., 2014, Three-dimensional non-linear elasticity-based 3D cubic B-spline finite element shear buckling analysis of rectangular orthotropic FGM plates surrounded by elastic foundations, Composites Part B: Engineering 56: 934-947.
[28] Shariyat M., Mohammadjani R., 2013, Three-dimensional stress field analysis of rotating thick bidirectional functionally graded axisymmetric annular plates with nonuniform loads and elastic foundations, Journal of Composite Materials 48: 2879-2904.
[29] Shariyat M., Alipour M.M., 2011, Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations, Archive of Applied Mechanics 81: 1289-1306.
[30] Shariyat M., Alipour M.M., 2013, A power series solution for vibration and complex modal stress analyses of variable thickness viscoelastic two-directional FGM circular plates on elastic foundations, Applied Mathematical Modelling 37: 3063-3076.
[31] Shariyat M., Jafari R., 2013, A micromechanical approach for semi-analytical low-velocity impact analysis of a bidirectional functionally graded circular plate resting on an elastic foundation, Meccanica 48: 2127-2148.
[32] Alipour M.M., Shariyat M., A power series solution for free vibration of variable thickness mindlin circular plates with two-directional material heterogeneity and elastic foundations, Journal of Solid Mechanics 3 :183-197.
[33] Ghorbanpour Arani A., Kolahchi R., Mosallaie Barzoki A.A., Mozdianfard M.R., Noudeh Farahani M., 2012, Elastic foundation effect on nonlinear thermo-vibration of embedded double-layered orthotropic grapheme sheets using differential quadrature method, Journal of Mechanical Engineering Science 227(4): 862-879.
[34] Saadatfar M., Aghaie-Khafri M., 2014, Electromagnetothermoelastic behavior of a rotating imperfect hybrid functionally graded hollow cylinder resting on an elastic foundation, Smart Structures and Systems, in press.
[35] John D.K., 1984, Electromagnetics, McGraw-Hill, Inc, New York.
[36] Kiani Y., Akbarzadeh A.H., Chen Z.T., Eslami M.R., 2012, Static and dynamic analysis of an FGM doubly curved panel resting on the Pasternak-type elastic foundation, Composite Structure 94: 2474-2484.
[37] Kapuria S., Nair P.G., 2010, Exact three-dimensional piezothermoelasticity solution for dynamics of rectangular cross-ply hybrid plates featuring interlaminar bonding imperfections, Composite Science and Technology 70: 752-762.
[38] Shu C., 2000, Differential Quadrature and its Application in Engineering, New York, Springer Publication.
[39] Chen W.Q., Bian Z.G., Lv C.F., 2004, 3D free vibration analysis of a functionally graded piezoelectric hollow cylinder filled with compressible fluid, International Journal of Solids and Structures 41: 947-964.
[40] Cheng Z.Q., Jemah A.K., Williams F.W., 1996, Theory for multilayered anisotropic plates with weakened interfaces, Journal of Applied Mechanic 63: 1019-1026.
[41] Cheng Z.Q., Kennedy D., Williams F.W., 1996, Effect of interfacial imperfection on buckling and bending behavior of composite laminates, AIAA Journal 34: 2590-2595.
[42] Shu X.P., Soldatos K.P., 2001, An accurate delamination model for weakly bonded laminates subjected to different sets of edge boundary conditions, International Journal of Mechanical Science 43: 935-959.