Enhancement of Slag Aggregates Quality by Polymeric Immersion

Subject Areas : Composite materials

Ali Ebrahimi ¹ , Seyed Esmaeil Mohamamdyan-Yasouj ² , Hossein Abbastabar ³

1 - Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran.
2 - Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran.
3 - Department of Chemistry, Najafabad Branch, Islamic Azad University, Najafabad, Iran.

Received: 2024-07-23 Accepted : 2024-11-05 Published : 2023-08-01

Keywords: Steel Slag, concrete, aggregate, PVA, PDMS, Silicate, porosity,

Abstract :

Utilization of steel slag aggregate (SSA) has been significantly developed in recent years. According to the volume expansion of SSA caused by F-CaO content, finding a suitable way to replace this type of aggregate in concrete has always been one of the crucial concerns. In the current study, enhancing a type of SSA, obtained from the waste of short casting furnaces called cupola furnace slag, is studied by utilizing different coating materials. In general, a positive effect can be observed on the enhancement of physical properties and microstructure of SSA by polyvinyl alcohol (PVA), polydimethylsiloxane (PDMS), and sodium silicate (SS) immersion. More specifically, porosity and water absorption of SSA were improved between 40 and 70%, which is notable. In addition, its impact value increases about 25% in some categories. More importantly, XRD diffraction analysis illustrates details about the reduction of F-CaO content, which occurred by the coating process. Therefore, immersion of SSA in these polymeric materials can be suggested as an appropriate method to improve its quality for utilization in concrete.

References:

[1] K. Ouyang, C. Shi, H. Chu, H. Guo, B. Song, Y. Ding, et al., An overview on the efficiency of different pretreatment techniques for recycled concrete aggregate. Journal of Cleaner Production, 263 (2020) 121264.
[2] S. C. Kou, C. S. Poon, Properties of concrete prepared with PVA-impregnated recycled concrete aggregates. Cement and Concrete Composites, 32(2010) 649-654.
[3] Q. Dong, G. Wang, X. Chen, J. Tan, X. Gu, Recycling of steel slag aggregate in portland cement concrete: An overview. Journal of cleaner production, 282 (2021) 124447.
[4] P. S. Humbert, J. Castro-Gomes, CO2 activated steel slag-based materials: A review. Journal of Cleaner Production, 208 (2019) 448-457.
[5] D. A. Brandt, J. C. Warner, Metallurgy Fundamentals. The Goodheart-Willcox Company. Inc. Publisher, 1985.
[6] N. Palankar, A. R. Shankar, B. M. Mithun, Durability studies on eco-friendly concrete mixes incorporating steel slag as coarse aggregates. Journal of Cleaner Production, 129 (2016) 437.
[7] Y. Biskri, D. Achoura, N. Chelghoum, M. Mouret, (2017). Mechanical and durability characteristics of High Performance Concrete containing steel slag and crystalized slag as aggregates. Construction and Building Materials, 150 (2017) 167.
[8] L. Chunlin, Z. Kunpeng, C. Depeng, Possibility of concrete prepared with steel slag as fine and coarse aggregates: A preliminary study. Procedia Engineering, 24 (2011) 412.
[9] M. H. Lai, J. Zou, B. Yao, J. C. M. Ho, X. Zhuang, Q. Wang, Improving mechanical behavior and microstructure of concrete by using BOF steel slag aggregate. Construction and Building Materials, 277 (2021) 122269.
[10] G. Wang, X. Chen, Q. Dong, J. Yuan, Q. Hong, Mechanical performance study of pervious concrete using steel slag aggregate through laboratory tests and numerical simulation. Journal of Cleaner Production, 262 (2020) 121208.
[11] D. Zhang, H. Zhu, Q. Wu, T. Yang, Z. Yin, L. Tian, Investigation of the hydrophobicity and microstructure of fly ash-slag geopolymer modified by polydimethylsiloxane. Construction and Building Materials, 369(2023) 130540.
[12] W. F. Santos, M. Quattrone, J V. M.ohn, S. C. Angulo, Roughness, wettability and water absorption of water repellent treated recycled aggregates. Construction and Building Materials, 146 (2017) 502.
[13] E. Kravchenko, C. Qin, Z. Lin, C. W. W. Ng, Effect of polyvinyl alcohol on the CO2 uptake of carbonated steel slag. Construction and Building Materials, 375 (2023) 130761.
[14] V. Spaeth, A. D. Tegguer, Improvement of recycled concrete aggregate properties by polymer treatments. International Journal of Sustainable Built Environment, 2 (2013) 143.
[15] D. Yao, H. Yu, X. Chen, X. Yu, J. Yao, X. Zheng, et al., Effect of surface modification on properties of steel slag aggregate and mixture. Construction and Building Materials, 402 (2023) 133058.
[16] Y. Kim, A. Hanif, M. Usman, M. J. Munir, S. M. S. Kazmi, S. Kim, Slag waste incorporation in high early strength concrete as cement replacement: Environmental impact and influence on hydration & durability attributes. Journal of Cleaner Production, 172 (2018) 3056.
[17] P. Saravanakumar, K. Abhiram, B. Manoj, Properties of treated recycled aggregates and its influence on concrete strength characteristics. Construction and Building Materials, 111 (2016) 611.