Investigating Water Supply System Electro-Mechanical Equipments Problems: A Case Study of Ethiopia
Subject Areas : Economics
1 - Faculty of Mechanical and Industrial Engineering, Bahirdar institute of technology, Bahirdar University, Ethiopia.
Keywords: Electro-Mechanical Equipment, Pump Installation, Operation and Maintenance, Submersible Pump,
Abstract :
Water is an essential element of life. The government of Ethiopia in collaboration with development allies’ attempts to increase pure water supply. Even though the coverage boosted dramatically still there is critical challenges in maximizing equipment’s reliability, improving service quality, maximizing capacity utilization, minimizing life cycle costs of water production machinery and reducing water waste. The objective of this study was to identify installation, operation, maintenance and related challenges, to evaluate the performance of pump station and to investigate the root causes so as improvements can be made deliberately. In this regard 20 town water supply stations were selected in Amhara region of Ethiopia and initially on site visit carried out and various existing situational surveys regarding the existing installation, operation and maintenance practice have been conducted. Next information collected using questionnaires, interview and focus group discussions. Then imperative performance indicating measurements taken and the data organized and important performance indicating parameters were analyzed using quantitative techniques. The study proved that all the pump stations run under the minimum performance requirements and the problems are deep enough to challenge the service quality and service cost of the pump stations. Unless the problems will be solved soon systematically the problems may be even mature to the nastiest situation that cannot handled.
Stel, H., Sirino, T., Ponce, F., Chiva, S., and Morales, R. (2015). Numerical investigation of the flow in a multistage electric submersible pump. Journal of Petroleum Science and Engineering 136, 41–54.
Abraham, O. (2018). Urban Water Supply in Hosanna Town of Hadiya Zone, SNNPR, Ethiopia. Civil and Environmental Research, 10(7), 2225-0514.
WHO - UNICEF (2010). Progress on Sanitation and Drinking - Water 2010 Update. Joint monitoring programme for water supply and sanitation. Geneva.
Fitsum, D. and Fikirte, D. (2014). Challenges of Potable Water Supply System in Rural Ethiopia: The Case of Gonji Kolela Woreda, West Gojjam Zone, Ethiopia. Natural Resources and Conservation, 2(4), 59-69.
Ermias, M., Brook, A. and Kannan, N. (2016). Assessment of Urban Water Supply and Sanitation: The Case of Bedesa Town, Damot Woyde Woreda of Wolaita Zone, Southern Ethiopia. Journal of Biology, Agriculture and Healthcare, 6(5), 2224-3208.
Mahesh, K. and Getu, T. (2018). Assessing the Challenges of Water Supply and Consumption Systems of Tora Town, SNNPR, ETHIOPIA. International Journal of Creative Research Thoughts (IJCRT), 6(2), 2320-2882.
Thewodros, B. and Seyoum, L. (2016). Water Supply and Health: Drinking water and Sanitation Coverage in Ethiopia 1990 – 2015. International Journal of Environment, Agriculture and Biotechnology (IJEAB), 1(1).
Desalegn, B. (2014). Assessing Causes and Challenges of Urban Water Supply: The Case of Mekelle City. International Journal of Science and Research (IJSR), 3(7), 2319-7064.
Ministry of water and energy (2013). Technical manual for urban water supply and sewerage utilities, EDRE, March 2013.
Chala, D. (2011). An Assessment of Urban Water Supply and Sanitation the Case of Ambo Town. Unpublished thesis, Addis Ababa University, Addis Ababa, Ethiopia.
Abebe, T., Techane, B. and Girma, G. (2013), Rural Water Supply Management and Sustainability: The Case of Adama Area, Ethiopia, Journal of Water Resource and Protection, 5, 208-221.
Zhiqiang, L., Weiwei, C. and Xiaole, H. (2015). Integrated production and preventive maintenance scheduling for a single machine with failure uncertainty. Computers & Industrial Engineering, 80, 236–244.
Solomon, T. and Roy, B. (2011). Estimation of the public benefits of urban water supply improvements in Ethiopia: a choice experiment. Applied Economics, Taylor Francis (Routledge), 2011, 45 (09), 1099-1108.
Mustapha, N., Nabil, N. and Mohamed, B. (2016). Integrated preventive maintenance and production decisions for imperfect processes. Reliability Engineering and System Safety, 148, 21–31.
Lei, X., Sanling, S., Xiaohui, C. and David, W. (2016). Reliability Engineering and System Safety. Joint optimization of production scheduling and machine group preventive maintenance, 146, 68–78.
Jun, N., Xi, G. and Xiaoping, J. (2015). Preventive maintenance opportunities for large production systems. CIRP Annals – Manufacturing Technology 64, 447–450.
Mohamed, B. (2002). The economic production lot-sizing problem with imperfect production processes and imperfect maintenance. International Journal of Production Economics; 76:257–264.
Xiaojun, Z., Zhiqiang, L., Lifeng, X. (2012). Preventive maintenance optimization for a multi-component system under changing job shop schedule. Reliability Engineering and System Safety, 101, 14–20.
Bulent, D., Tugwell, P. and Greatbanks, R. (2000). Overall equipment effectiveness as a measure of operational improvements - A Practical Analysis. Internal Journal of Operation & Production Management, 20(12), 1488-1502.
Peter, M. and Liliane, P. (2008). Performance measurement using overall equipment effectiveness (OEE): Literature review and practical application discussion. International Journal of Production Research, 2008, 46 (13), 3517-3535.
Rakesh, R., Jos, B. C., and Mathew, G. (2013). FMEA analysis for reducing breakdowns of a sub system in the life care product manufacturing industry. International journal of engineering science and innovative technology, 2(2), 218-225.
Peter, M. and Liliane, P. (2008). Performance measurement using overall equipment effectiveness (OEE): Literature review and practical application discussion. International Journal of Production Research, 46 (13), 3517-3535.